Operation Manual

40
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
Using the answering machine at the base
Switch on/off
1. Press . The setting is announced and the display briefly
displays On or Off.
Message playback
1. Press . New messages are played first.
During playback:
to delete the current message.
once to repeat the message.
twice to play the previous message.
to play the next message.
to pause and resume playback.
to stop playback.
adjust the speaker volume + or – during playback.
At the end of playback press
and follow the voice prompt to
press
again to delete all old messages.
Remote access
Ensure that you have Remote Access turned on and that you
have set a Remote Access PIN first if you want to use this feature.
When switched on, you can call in from another phone to listen
to your messages and operate your answering machine. You are
asked to enter your system PIN so that other people cannot ring
up and listen to your messages. To change your System PIN, see
page 28.
To switch remote access on/off
1. Press Menu. Scroll to Answer Machine and press OK.
2
. Scroll to Answer Settings and press OK.
3
. Scroll to Remote Access and press OK.
4
. Press or to select On or Off.
Remote access
When switched on, you can call in
from another phone to listen to your
messages and operate your answering
machine. You are asked to enter your
system PIN so that other people
cannot ring up and listen to your
messages. To change your System
PIN, see page 28.