Operation Manual

16
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email [e-mail]
Receive a call
When you receive a call, the phone rings. The display shows
the caller’s number and if it matches an entry in the phonebook
it shows the name also. If you do not have a Caller Display service,
the screen shows
External call.
1. Press
on the handset or
on the base.
Earpiece / handsfree volume
During a call you can adjust the volume of the earpiece or
loudspeaker. There are 5 levels.
1. Press or
to increase or decrease the volume.
Call Waiting
Providing you have subscribed to your network’s Call Waiting
service and it is switched on, your BT Diverse 7460 will alert you
to a second incoming call while you are already engaged on an
external call.
1. You will hear the call waiting tone, then the display will
show
Call Waiting and the telephone number of the caller,
or the stored name and number if it matches an entry in
your phonebook.
2. Press
(handset) or
R
(base) to answer the new call
and your rst caller is put on hold.
3. Press to toggle between the two callers.
4. Press
(handset) or
(base) to hang up the
current call.
Secrecy
During a call, you can talk to someone nearby without your
caller hearing.
1. Press left soft key
(
Secrecy). The display shows
Secrecy On and your caller cannot hear you.
2. Press left soft key again
(
Off) to return to your caller.
To switch your Call Waiting service on
or off, see page 41.
Auto answer
As long as you have auto answer set
to ON you can answer a call by lifting
the handset off the base. If you have
switched auto answer off, you will
need to press
as well. Auto answer
ON is the default setting. See page 28.
For more information on Caller Display,
see page 37.