Operation Manual

32
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email [e-mail]
Ring priority
1. Press Menu. Scroll
to
Settings and press OK.
2. Scroll to
Ring Priority and press OK.
3.
All is highlighted. Press OK for all handsets to ring together.
Or
Scroll
or
to select the handset number you want to ring rst
or
Base (if you want the base to ring rst) and press OK.
The ring delay option is then displayed. Press
or to select the
number of rings before the other handsets ring and press
OK.
4. Press
Back to return to the previous menu.
Dial mode
1. Press Menu. Scroll
to
Settings and press OK.
2. Scroll to
Dial Mode and press OK.
3. Scroll or to select either
Tone or Pulse and press OK.
4. Press
Back to return to the previous menu.
Recall mode
1. Press Menu. Scroll
to
Settings and press OK.
2. Scroll to
Recall Mode and press OK.
3. Scroll or to select
Timed Break or Earth and press OK.
4. Press
Back to return to the previous menu.
System PIN
1. Press Menu, scroll
to
Settings and press OK.
2. Scroll
to
System PIN and press OK.
3. Enter the old PIN (default setting 0000) and press
OK.
4. Enter the new PIN and press
OK. Re-enter the new PIN and
press
OK. The display will show Saved.
The System PIN is used when
changing certain settings and
registration / de-registration.
The default setting is 0000.
You can change this to your
own preferred 4-digit number.
If any existing code is displayed.
Press
Clear to delete digits.
The System PIN is also used as your
Remote Access PIN, see page 46.