Operation Manual
33
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
Reset base
1. Press Menu, scroll
to
Settings and press OK.
2. Scroll
to
System Reset and press OK.
3. Enter the 4 digit system PIN code (default setting 0000) and
press
OK.
4. Display will show
Reset to Default? Press Yes to conrm or
No to cancel.
Date/Time/Alarm
Set date and time on the handset or base
Providing you have subscribed to your network’s Caller Display
service, the date and time is set automatically when you receive
your rst call.
1. Press
Menu, scroll
to
Settings and press OK.
2.
Date & Time is highlighted. Press OK.
3.
Time Format is highlighted, press OK. Press
or
on
the handset or
or
on the base to choose
24 Hour or 12
Hour and press OK.
4. Scroll
to
Date Format and press OK. Press
or
on the handset or
or
on the base to select
DD/MM/YYYY
(handset) or
dd/mm (base) or MM/DD/YYYY (handset) or mm/dd
(base) and press
OK.
5. Scroll
to
Enter Time and press OK. Enter the time using
the keypad as either the 24 hour or 12 hour format (previously
selected), e.g. 17:30 or 05.30. If 12 hour format was chosen,
press
or
to select AM or PM. Press OK.
6. Scroll
to
Enter Date and press OK. Enter the date
e.g. 09 04 2010 (displayed as
09/04/2010) for 9 April 2010
and press
OK.
7. Press
Back to return to the previous menu level.