Operation Manual

54
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email [e-mail]
Registration of an additional handset when base
PIN changed
(i.e. if PIN changed from default setting of 0000)
At the handset:
1. Press
Menu, scroll
to
Settings and press OK.
2. Scroll
to
HS Settings and press OK.
3. Scroll or
to Register and press OK.
4. Press or
to select the base you want (1-4). You should
only select a base that has a
* displayed beside it. Press OK.
5. Enter the 4-digit system PIN then press
OK. The display shows
Overwrite the registration on Base x? Press Yes.
6. Press and Hold Base Find Key is displayed, press OK on the
handset to commence registration.
At the base:
1. Press and hold
for approximately 8 seconds until it
beeps and then release. Press
OK on the handset to conrm.
The base will go into registration mode for 90 seconds and
will then beep if registration is successful. The handset will
automatically be assigned the next available handset number.
Internal calls
Call another handset/base
You can make an internal call between the handset and base
(or another handset if more than one handset is registered to
the base).
1. Press
on the base or handset and the other one will
automatically ring. If you have more than handset you need
to press
or
to select the handset (1-5) or base you
want to call, then press
OK.