Operation Manual

7
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email [e-mail]
Battery performance
In ideal conditions, a fully charged
battery should give up to 12 hours
talk time or 120 hours standby time
on a single charge.
Note that new batteries do not reach
full capacity until they have been in
normal use for several days.
The charge capacity of rechargeable
batteries will reduce with time as
they wear out, giving the handset
less talk/standby time. Eventually
they will need to be replaced. New
rechargeable batteries are available
from the BT Diverse 7460 Helpline
on 0800 218 2182*.
After charging your handset for the
rst time, subsequent charging time
is about 6–8 hours a day depending
on usage. Batteries and handset may
become warm during charging.
This is normal.
Using your BT Diverse 7460 on a
Broadband line?
If this product is to be used on a
broadband line then you must
ensure that it is connected via
an ADSL microlter. Using this
product on a Broadband line
without an ADSL microlter may
cause problems with this product
and your Broadband service.
Any other telephone extensions
you have should also be tted with
ADSL microlters.
Additional BT ADSL microlters can
be purchased from www.shop.bt.com
3. Place the handset on the base to charge for at least 24 hours.
4. When the batteries are fully charged, plug the end of the
telephone line cord into the telephone wall socket.
Set date and time manually on the handset
or base display
Providing you have subscribed to your network’s Caller Display
service, the date and time is set automatically when you receive
your rst call.
To set the date and time manually, follow the procedure below.
If you set the date and time using the handset it will also set the
date and time on the base display.
1. Press the right soft key
(
Menu) and scroll to Settings
and press the right soft key
(
OK).
2.
Date & Time is highlighted. Press OK.
3.
Time Format is highlighted. Press OK. Scroll
or
to
choose how you want the clock displayed, either
24 Hour or 12
Hour. Press OK.
4. Scroll
to Date Format and press OK. Scroll
or
to choose
DD/MM/YYYY or MM/DD/YYYY. Press OK.
5. Scroll
to Enter Time and press OK. Enter the time
using the keypad as either the 24 hour format or 12 hour
format (previously selected) e.g. 17:30 or 05.30 for 5.30pm.
If 12 hour was chosen, press
or
to select AM or PM.
Press
OK.
6. Scroll
to Enter Date and press OK. Enter the date,
e.g. 09 04 2010 (displayed as
09/04/2010) for 9th April 2010.
Press
OK.
7. Press
to return to the standby screen.
Your BT Diverse 7460 is ready for use.