Operation Manual

If you experience any problems, please call the Helpline on 0800 145 6789* or email bt.helpdesk@sgweurope.com

PIN code

Your BT Elements has a security PIN code which you will need

to change some of the settings on your phone. The default

PIN code is 0000. You may want to change this to prevent

unauthorised changes to your settings.

1. Press to open the main menu.

2. Press or until

Setup

is displayed, then press .

3. Press or to select

Pin Code

and press .

4. Enter the current 4 digit PIN code and press .

5. Enter a new 4 digit PIN code and press .

6. Re-enter the new PIN code and press .

7. Press repeatedly to exit and return to standby.

Dial mode

The dialling mode is pre-set to Tone (DTMF) dialling. If you are

using your BT Elements phone with an older type of

switchboard/PBX you may required to change this setting to

Pulse dialling.

1. Press to open the main menu.

2. Press or until

Setup

is displayed, then press .

For security when you enter each

digit of the PIN code it will be

displayed as a

Contact your PBX/Switchboard

provider if you are unsure which

setting to use.

Set-up menu

BT Elements UG [4-1]:9068 BT Elements UG [3-2] 12/11/12 16:12 Page 31