User guide

ManualsBrandsBT ManualsConsumer electronicsFreelance XD 500

BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970

User Guide

BT FREELANCE XD 510

Summary of content (71 pages)

PAGE 1
BT Freelance XD 510 – Edition 02 – 07.04.
PAGE 2
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Welcome… to your BT Freelance XD 510 Digital Cordless Telephone Answering Machine 12 minutes digital recording time. Access your messages from any other modern telephone. The 50 name and number directory makes it simple to store and dial your most frequently used numbers. Use Caller Display and the 20 numbers Calls list to see who is calling before you pick up the phone and keep track of incoming calls.
PAGE 3
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Got everything? Section BT Freelance XD 510 handset BT Freelance XD 510 base This User Guide provides you with all the information you need to get the most from your phone. 2 x AAA NiMH rechargeable batteries Mains power adaptor Telephone line cord Belt clip Before you make your first call you will need to set up your phone. Follow the simple instructions in ‘Getting Started’, on the next few pages.
PAGE 4
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 4 In this guide Getting started Location . . . . . . . . . . . . . . . . . . . . .6 Connecting the base . . . . . . . . . . . .6 Preparing the handset. . . . . . . . . . . .7 Connecting the chargers and charging the handsets . . . . . . . . . . .8 Connecting to the telephone line . . .9 Setting the day and time . . . . . . . . .9 Getting to know your phone Handset buttons. . . . . . . . . . . . . . . .11 Handset display icons. . . . . . . . . . . .
PAGE 5
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 In this guide Setting up the answering machine Base display . . . . . . . . . . . . . . . . . .36 Switch answering machine on/off . . .37 Base loudspeaker volume . . . . . . . . .37 Answer delay . . . . . . . . . . . . . . . . . .38 Outgoing messages . . . . . . . . . . . . .39 Record your own outgoing message . 40 Check your outgoing message . . . . .41 Select the outgoing message . . . . . .42 Re-instate the pre-recorded outgoing message . . . . . . . .
PAGE 6
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 6 Getting started WARNING Do not place your BT Freelance XD 510 in the bathroom or other humid areas. Handset range The BT Freelance XD 510 has a range of 300m outdoors when there is a clear line of sight between the base and the handset. When there is no clear line of sight between the handset and the base, e.g. the base is indoors and the handset is either indoors or outdoors, the range could be reduced to 50m.
PAGE 7
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Getting started Preparing the handset 1 Insert the 2 x AAA rechargeable batteries supplied, taking note of the polarity markings inside the battery compartment, then slide the battery compartment shut. WARNING Never use non-rechargeable batteries. Only use the approved batteries. Using unapproved batteries will invalidate your guarantee and may damage the telephone. The charging light will remain lit even when the batteries are fully charged.
PAGE 8
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 8 Getting started Battery performance To keep the batteries in the best condition, leave the handset off the base for a few hours at a time. Running the batteries right down at least once a week will help them last as long as possible. Please note, that new NiMH batteries do not reach full capacity until they have been in normal use for several days.
PAGE 9
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Getting started Connecting to the telephone line Plug the telephone line cord into the socket on the back of the base and connect the other end to the telephone wall socket. Menu When you press twice, the main menu options are automatically announced through the handset earpiece. Setting the day and time The message counter on the base unit will flash between 0 and C until the day and time are set.
PAGE 10
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 10 Getting started 3 Press . You will hear “Please enter new day and time after the tone”. After the tone enter the day, followed by the time using the 24 hour clock. 4. You will then hear your setting confirmed. Press twice to return to standby. Secrecy Del Your BT Freelance XD 510 is ready for use and the answering machine is switched on ready to record any new messages.
PAGE 11
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Getting to know your phone 11 Handset buttons Redial/Pause To redial one of the 5 last numbers called. Also used to enter a pause in a stored number. Digita lC l ar it y In Use light Indicates when the phone is ringing or in use. Quickdial Use to access the 50 names and numbers stored in the Quickdial phonebook. Menu P Secrecy Del AB 2 GH 4 JKL 5 PQ R S 7 C 1 TUV 8 Menu/Tick Use to access and select the options in the menu.
PAGE 12
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 12 Getting to know your phone Sample standby screen – These are where the handset icons will appear. Idle screen Handset 1 Displays the number of the handset at all times. page 26 EXT INT HANDSET 1 Handset display icons – These are the symbols you will see on your handset’s screen.
PAGE 13
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Getting to know your phone Base buttons Skip backward Lets you skip backwards through your messages and memos. Use to switch the audible message alert on or off. Use to select your Answer and Record outgoing message. Skip forward Lets you skip forward through your messages and memos. Use to set the answer delay. Use to select your Answer Only outgoing message. Page Press to page the handset(s). Answer on/off Switches the answering machine on and off.
PAGE 14
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 14 Getting to know your phone Menu map Secrecy Press Del to go back to the previous menu level. Secrecy Press and hold Del at any time to return to the standby display. After 30 seconds if no buttons are pressed the handset will automatically return to standby.
PAGE 15
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Getting to know your phone Setup Base Vol Volume 1.....5 Vol Off Base Mel Melody 1.....5 Sel Base Base 1.....4 Del HS PIN? Pin Code PIN? Auto Handset 1.....5 New PIN Retype Priority On Off Select Base Handset 1.....
PAGE 16
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 16 Getting to know your phone Handset Beep Ring Vol Keytone On or Off Low Batt On or Off Outrange On or Off Volume 1.....5 Vol Off Ear Vol Ear Vol 1.....5 Int Mel Melody 1.....5 Ext Mel Melody 1.....5 Auto Ans On Off Name Language English Francais Deutsch Nederl Italiano Espanol Portuges Norsk Dansk Svenska Suomi Register Base 1.....
PAGE 17
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Using the phone 17 Switching the handset on and off 1. Press and hold R to switch the handset off. To switch on again, press and hold R again. Making an external call 1. Press . When you hear the dial tone enter the number you want. The display shows the EXT icon. Preparatory dialling 1. Enter the number first. The number is shown in the display. 2. Press Secrecy Press Del to delete any incorrect digits. to dial. End a call 1.
PAGE 18
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 18 Using the phone Receiving calls Receiving calls with Caller Display If you have subscribed to a Caller Display Service, the number (and name if stored in the phonebook) will be displayed. When the phone rings the display will show CALL and the EXT icon will flash. 1. Press to answer the call or, if the handset is on the base, simply lift it and speak. Earpiece volume There are 5 volume levels you can select from. During a call: 1.
PAGE 19
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Using the phone Redial You can redial any of the 5 last numbers called. 1. Press Redial P 2. Press then or to scroll through the redial list. to dial a displayed number. Secrecy During a call you can speak to someone nearby without your caller hearing you. Secrecy 1. During a call, press Del . The display shows MUTE and your caller cannot hear you. 2. Press Secrecy Del again to resume your call.
PAGE 20
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 20 Using the phone Entering names: Use the keypad letters to enter names, e.g. to store the name TOM: Store a name and number Menu 1. Press to enter the menu, then . shows PHONEBK and press Press 8 once for T. Press 6 three times for O. Wait for the cursor to move across. until the display Menu 2. ADD is displayed, press Menu . 3. NAME? is displayed. Enter the name you want using the keypad, then press to confirm. Menu Press 6 once for M.
PAGE 21
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Using the phone Dial a number 1. Press 2. Use Quickdial . or to display the entry you want. Or To search alphabetically, press the relevant keypad number, e.g. for TOM, press 8 and scroll through the entries under T. 3. Press to dial a displayed entry. Edit a name and number 1. Press Menu . PHONEBK is displayed, press 2. Press to scroll to MODIFY and press 3. Press 4. Use press to enter the menu. or . Menu Menu . .
PAGE 22
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 22 Using the phone Secrecy 7. Edit the number, using Del to delete any incorrect digits and the keypad to enter new digits. Menu 8. Press to store the new number. You will hear a confirmation beep. 9. Press and hold Secrecy Del to return to standby. Delete a name and number 1. Press 2. Press 3. Press Menu to enter the menu. . PHONEBK is displayed, press to scroll to DELETE and press Menu Menu . . 4.
PAGE 23
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Using the phone Paging handsets You can alert handset users that they are wanted, or locate a missing handset. You will need to lift the handset off the base unit to access the button which is situated underneath the handset. Page 1. Press on the base. The handset(s) will ring and the display on each handset will show INT and flash oooo. Page To stop paging: 1. Press Page again. Or Press any button on the handset.
PAGE 24
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 24 Handset settings Keypad beeps Default setting for keypad beeps is ON. Each time you press a button on the handset keypad, you will hear a beep to confirm the button press. These beeps can be switched on or off. 1. Press Menu to enter the menu. to scroll to HANDSET and press 2. Press 3. BEEP is displayed, press Menu 4. KEYTONE is displayed, press Menu . . Menu . Menu 5. Use or to select ON or OFF and press You will hear a confirmation tone.
PAGE 25
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Handset settings 4. Use or to select the required volume – VOLUME 1-5 or VOL OFF. You will hear a sample ring. 5. Press Menu . You will hear a confirmation tone. Handset ringer melody There are 5 melodies to choose from and you have the option to choose a different melody for external and internal calls. 1. Press Menu to enter the menu. Menu 2. Press to scroll to HANDSET and press 3. Press to scroll to INT MEL or EXT MEL and press .
PAGE 26
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 26 Handset settings Auto-talk If you set Auto-talk to ON, when you receive an incoming call and the handset is on the base or charger, you can pick it up to answer the call. You do not need to press . 1. Press Menu to scroll to HANDSET and press 2. Press 5. Press Menu or Menu . Menu to scroll to AUTO ANS and press 3. Press 4. Use to enter the menu. . to select auto-talk ON or OFF. . You will hear a confirmation tone.
PAGE 27
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Handset settings Secrecy Secrecy 4. Press Del to delete the existing name. Then enter the name you want using the keypad and press . You will hear a confirmation tone. Menu Press Del to delete any incorrect characters. Handset language You can change the language used on the handset display. You can choose from English, Francais, Deutsch, Nederl, Italiano, Espanol, Portuges, Norsk, Dansk, Svenska, Suomi. 1. Press Menu 2.
PAGE 28
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 28 Base settings Base ringer volume Default base ringer volume is level 5. There are 5 ringer volume levels to choose from or, you can switch the ringer off. 1. Press Menu to enter the menu. to scroll to SETUP and press 2. Press 3. BASE VOL is displayed. Press 4. Use or Menu Menu . . to select the required volume – VOLUME 1-5 or VOL OFF. You will hear a sample ring. 5. Press Menu . You will hear a confirmation tone.
PAGE 29
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Base settings Select a base to use If a handset is registered to more than one base, you can select which base to use. You can register your handset to up to 4 bases. 1. Press Menu See ‘Registering your handset to another base’, page xx for more information. to enter the menu. Menu 2. Press to scroll to SETUP and press 3. Press to scroll to SEL BASE and press . Menu . 4. Use or to select the base you want and press .
PAGE 30
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 30 Base settings 4. Enter your 4-digit PIN (original setting 0000) and press . NEW PIN is displayed. Menu 5. Enter your new 4-digit PIN and press RETYPE is displayed. Menu . Menu 6. Re-enter your new 4-digit PIN and press You will hear a confirmation tone. 7. Press and hold Secrecy Del . to return to standby. Handset and base reset 1. Press Menu to scroll to SETUP and press 2. Press 3. Use to enter the menu.
PAGE 31
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Base settings Default settings are: Feature Default Setting Earpiece volume . . . . . . . . . . . . . . . . . . . 3 Handset & base ringer volume . . . . . 5 Handset & base melody . . . . . . . . . . . 1 PIN code . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 0 0 0 Handset name . . . . . . . . . . . . . . . . . . . . . HANDSET 1 Handset language . . . . . . . . . . . . . . . . . ENGLISH Keypad beeps . . . . . . . . . . . . . . . . . . . . . .
PAGE 32
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 32 Caller Display and the Calls list IMPORTANT To use Caller Display you must first subscribe to the service from your network provider. A quarterly fee is payable. For more information on BT’s Calling Features, call BT free on 0800 800 150. When storing Phonebook numbers, make sure you store the full telephone number, including the area code, otherwise a name/ number match will not be found.
PAGE 33
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Caller Display and the Calls list If the name of your caller has been stored in the phonebook, this will be displayed. Press Menu to display the number. Menu Press again to display the time the call was received. 3. Press to dial the number. Or Press Secrecy Del to go back to the Calls list. To delete a Calls list number 1. Press 2. Use 3. Press to enter the Calls list. or Menu Menu to scroll to the entry you want to delete.
PAGE 34
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 34 Caller Display and the Calls list Delete all Calls list numbers 1. Press 2. Press to enter the Calls list. Secrecy Del . DEL ALL is displayed. Menu 3. Press to confirm. The display will show EMPTY for 2 seconds before returning to standby. Store a Calls list number to the Phonebook 1. Press to enter the Calls list. 2. Use or to scroll to the entry you want and press . The display shows the date and time of the call. Menu 3.
PAGE 35
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Setting up the answering machine Your BT Freelance XD 510 can digitally record up to 12 minutes of messages, with each message lasting a maximum of 3 minutes. As well as recording incoming messages, you can record memos for other users. You can operate your answering machine from: The base, see page 45. The handset, see page 47. Remotely, from any other TouchtoneTM telephone, see page 50.
PAGE 36
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 36 Setting up the answering machine Base display The base display shows symbols relative to your answering machine and the table below provides an explanation of what these symbols mean. Symbol Definition (Blank) Power off. C-0 (flashing) Day/Time needs to be set. 0-9 Answer-on mode, 0-9 messages. 9 (flashing) 10-59 messages. Indicates when more than 9 messages are stored. – alternating with 0-9 Power on, but set to answer off mode.
PAGE 37
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Setting up the answering machine Switch the answering machine ON/OFF 1. Press and release Ans. O n/O ff to switch ON or OFF. If you hear “Answer on, your outgoing message is....” the answering machine is switched on and is ready to answer incoming calls and record any messages. The display on the base shows the number of messages stored in the memory. If you hear “Answer off” the answering machine is switched off.
PAGE 38
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 38 Setting up the answering machine If you adjust the volume when the answering machine is not being used, a beep sounds at each press. When the volume reaches its highest or lowest levels two beeps will sound. Answer delay For more information on Time Saver setting, see page 51. Answer delay sets the number of times your BT Freelance XD 510 will ring before the answer machine picks up your call and starts playing the outgoing message.
PAGE 39
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Setting up the answering machine Check the answer delay setting 1. Press and release Skip . The current setting will be announced and shown on the display. Audible message alert When you have new messages, with the audible message alert switched on, you will hear a beep every 10 seconds. The default setting is OFF. The message alert beep is at the volume you have set for the loudspeaker. With the answering machine ON and in standby mode: 1.
PAGE 40
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 40 Setting up the answering machine You can only record your own outgoing message via the handset. When recording your Answer Only message, remember to advise your caller that they will not be able to leave a message. To reinstate the pre-recorded message, see page 43. Record your own outgoing message Your Answer and Record outgoing message can be up to 3 minutes long and will replace the pre-recorded message.
PAGE 41
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Setting up the answering machine 5. After the tone, speak your message clearly into the handset. Press to end recording. You will hear a long beep and your message will be played back to you. 6. You will then hear the message menu again, press and hold Del to return to standby. Secrecy Check your outgoing message Via the base: 1 Press Ans. O n/O ff . You will hear either: ‘Answer on, your outgoing message is...
PAGE 42
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 42 Setting up the answering machine 3. Press 8 , you will hear ‘To play outgoing message, press 2’. 4. Press 2 and your selected outgoing message will be played. Secrecy 5. Press and hold Del to return to standby. Select the outgoing message Via the base: 1. Press and hold until you hear, ‘Please select outgoing message’ then release the button. Ans. O n/O ff 2. To select Answer and Record, press and release Skip .
PAGE 43
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Setting up the answering machine 3. To select Answer and Record, press 5 . To select Answer Only, press 6 . You will hear your chosen message, then – ‘To hear main menu, press 1’. – ‘To hear the outgoing message menu, press 8’. Secrecy 4. Press and hold Del to return to standby. Re-instate the pre-recorded outgoing message You can delete your own outgoing message and return to the pre-recorded outgoing message. Via the base: 1.
PAGE 44
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 44 Setting up the answering machine The message will stop playing and you will hear a confirmation beep. The pre-recorded outgoing message will be then be played back and re-instated. Via the handset: 1. Lift the handset. Menu 2. Press twice, then press 8 . You will hear, ‘To play outgoing message, press 2’. 3. Press 2 . The selected outgoing message will be played. During playback, press 5 to delete it.
PAGE 45
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Using the answering machine via the base Message playback 1 Press Play . You will hear, ‘You have (n) messages’. Your message(s) begin to play back, starting with the first message received. At the start of each message, the number of the message is announced and displayed on the base Press at any time to stop playback. Stop During playback: Press Play , to pause a message, P will flash in the display and you will hear a beep every 10 seconds.
PAGE 46
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 46 Using the answering machine via the base At the end of playback: You will hear ‘End of messages. To delete all messages, press delete’. You then have 8 seconds in which you can: Press Del to delete all messages, you will hear ‘All messages deleted’. Or Press Stop to cancel message deletion. This will save any messages you have selected individually for deletion. Any messages not deleted will be saved.
PAGE 47
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Using the answering machine via the handset You can use your BT Freelance XD 510 for a variety of functions: to listen to your messages; delete, skip forward or backward; record a memo or new outgoing message, and to screen incoming calls. Message playback Menu 1. Press twice. The handset will beep and you will hear the main menu options. TAM MENU will flash in the display and the handset will beep. 2. Then press 2 to play all messages.
PAGE 48
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 48 Using the answering machine via the handset Press 8 to play the outgoing message menu. then: 2 to play the outgoing message. 3 to record an Answer and Record message. 4 to record an Answer Only message. 5 to select the Answer and Record message. 6 to select the Answer Only message. 8 to hear the outgoing message menu again. 1 to hear the main menu again. Press 9 to set a new security code. (See Remote access, page 50).
PAGE 49
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Using the answering machine via the handset Record a memo You can record a memo message for another user of your BT Freelance XD 510. Your memo can be up to 12 minutes (maximum recording time), but you should try to keep it short to leave space for other messages. 1. Press Menu You cannot record a memo via the base. twice. 2. Press 7 . You will hear ‘Please speak after the tone. To end recording press square’. 3.
PAGE 50
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 50 Using the answering machine via the handset 1. Press Menu to hear the caller leaving their message. 2. If you want to interrupt and speak to the caller press . Recording will stop automatically. Remote access You can operate your answering machine from any TouchtoneTM phone by calling your BT Freelance XD 510 and entering a 3 digit security PIN. Using a PIN code prevents other people from accessing your machine without permission.
PAGE 51
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Using the answering machine via the handset 5. Press to confirm. 6. Press and hold Secrecy Del to return to standby. Switch your answering machine on remotely If you forget to switch your answering machine on, you can do it remotely from another phone. 1. Dial your telephone number and let it ring. After 20 rings you will hear your outgoing message. 2. Press , then enter your security code. 3. Press 7 within 8 seconds.
PAGE 52
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 52 Using the answering machine via the handset Operating your answering machine remotely When you have accessed your answering machine messages, you can press 1 to hear the remote access main menu options. Simply follow the instructions you hear: ‘To play all messages press 2’. ‘To play new messages press 3’. ‘To skip back during messages press 4’. ‘To delete during messages press 5’. ‘To skip forward during messages press 6’.
PAGE 53
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Additional handsets and bases Up to 5 handsets can be registered and used from your BT Freelance XD 510 base. With more than one handset you can make internal calls between two handsets while a third is making an external call, you can transfer an external call to another handset or hold a three-way conversation. Each handset can be registered on up to 4 bases.
PAGE 54
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 54 Additional handsets and bases Transfer an external call to another handset During an external call: 1. Press Int then enter the number of the handset that you want to transfer the call to (1-5). Your caller will be put on hold. 2. When the internal handset answers, you can talk to the handset user, then press to transfer the call. Or If the call is not answered you can speak to the caller again by pressing Int .
PAGE 55
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Additional handsets and bases When the handset is answered, press and hold about 3 seconds. 3. You can now start your 3-way conversation. If the internal handset does not answer, press return to the external caller. 4. Press for Int to button to end the call. Handset Priority With more than one handset registered to the base, you can select one of the handsets (or the base) to ring first when you receive an incoming call.
PAGE 56
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 56 Additional handsets and bases 6. Press or to scroll to the number of rings you want and press . PRIORITY is displayed, denoting that handset priority is on. Menu 7. Press Menu to confirm. The display shows ON. Register a handset to another base At the base: 1. Press and hold for at least 10 seconds, until you hear the validation tone (two beeps), then release the button. Page At the handset: 1. Press Menu to enter the menu. Menu . 2.
PAGE 57
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Additional handsets and bases SEARCH 1, 2, 3, 4 is displayed and the symbol will flash as the handset tries to locate the base. When the handset locates the base, the handset number will be shown on the display. De-register a handset from the base 1 Press 2 Use Menu Handsets can only be de-registered using another handset. to enter the menu. Menu to scroll to SETUP and press Menu 3 Use to scroll to DEL HS and press PIN? is displayed.
PAGE 58
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 58 Help Help Many problems are caused by the telephone and power supply cables being incorrectly connected, not connected at all, or by the power being turned off. If you are experiencing a problem with your BT Freelance XD 510, check the following: • That the mains power supply is correctly connected at both the base and at any chargers, and that the power is switched on at the wall socket. • That the telephone line cord is correctly connected.
PAGE 59
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Help Problems Possible cause Replacing the handset batteries After a time, you may find that the handset batteries run out of charge more quickly. This is a standard sign of wear and the batteries will need replacing. See page 7. No display appears The batteries may be flat or dead. Recharge or replace the batteries, see page 7. The handset may be switched off, see page 17.
PAGE 60
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 60 Help Problems Possible cause Buzzing noise on my radio, TV, computer or hearing aid Sometimes, your BT Freelance XD 510 can interfere with other electrical equipment if it is placed too close. It is recommended that you place your BT Freelance XD 510 at least 2-3 metres away from such appliances to avoid any risk of interference.
PAGE 61
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 Help Problems Possible cause The incoming caller’s number is not displayed even though I have Caller Display The caller may have withheld their number. The caller’s name is not displayed even though I have saved it in a Phonebook Have you stored the full dialling code with the number? – if an exact name/number match is not found the name will not be displayed. Answering machine does not record any messages The memory may be full.
PAGE 62
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 62 General information IMPORTANT This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. Safety General Only use the power supply included with the product. Using an unauthorised power supply will invalidate your guarantee and may damage the telephone. The item code for the base power supply is 005391.
PAGE 63
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 General information It is recommended that if you have a pacemaker fitted, you check with a medical expert before using this product. Your product may interfere with other electrical equipment, e.g. TV and radio sets, clock/alarms and computers if placed too close. It is recommended that you place your product at least one metre away from such appliances to minimise any risk of interference. Never dispose of the batteries in a fire.
PAGE 64
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 64 General information Do not submerge any part of your product in water and do not use it in damp conditions, such as bathrooms. Do not expose your product to fire, explosive or other hazardous conditions. There is a slight chance that your phone could be damaged by an electrical storm. We recommend that you unplug the power and telephone line cord for the duration of the storm.
PAGE 65
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 General information Switchboard compatibility This product is intended for use within the UK for connection to the public telephone network and compatible switchboards, which support tone dialling and timed break recall. If in doubt please consult your service provider. Switchboard external line access code You may need to enter an access code (e.g. 9) in order to get an outside line.
PAGE 66
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 66 General information 3. Use 4. Use Menu to scroll to PABX and press to scroll to PBX 1 and press Menu 5. Enter your PIN number and press 6. Enter the access code and press Menu . Menu . PIN? is displayed . . Adjust the length of the pause 1. Press 2. Use Menu . to scroll to SETUP and press Menu Menu . 3. Use to scroll to PABX and press . 4. Use to scroll to PAUSE. 3 SEC is displayed. 5.
PAGE 67
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 General information Dialling mode You only need to adjust this setting if your switchboard does not operate with tone dialling. You can change the dial mode to Pulse (with Earth Recall) or Tone (tone with Earth loop recall). 1 Press Menu . Menu 2 Use to scroll to SETUP and press 3 Use to scroll to DIALMODE and press 4 Press or . Menu . to select either TONE or PULSE and press Menu . You will hear a confirmation tone.
PAGE 68
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 68 General information The conditions of this guarantee are: The guarantee shall only apply to defects that occur within the12 month guarantee period. Proof of purchase is provided. The equipment is returned to BT or its agent as instructed.
PAGE 69
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 General information Outside of the 12 month guarantee period: If your product needs repair after the guarantee period has ended, the repair must meet the approval requirements for connection to the telephone network. We recommend that you contact BT’s approved repair agent, TecLogic on 01672 564444 or a local qualified repairer. Returning your phone If the Helpline is unable to remedy your problem they will ask you to return the product.
PAGE 70
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970 70 General information Declaration of Conformance Hereby, Suncorp Technologies, declares that this BT Freelance XD 510 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The Declaration of Conformance for the BT Freelance XD 510 is published on the web site:- http://www.suncorptech.
PAGE 71
Visit us at www.bt.com Ofﬁces worldwide The telecommunications services described in this publication are subject to availability and may be modiﬁed from time to time. Services and equipment are provided subject to British Telecommunications plc’s respective standard conditions of contract. Nothing in this publication forms any part of any contract. © British Telecommunications plc 2004. Registered Ofﬁce: 81 Newgate Street, London EC1A 7AJ. Registered in England No. 1800000.