User guide

39
BT Freelance XD 510 – Edition 02 – 07.04.04 – 5970
The message alert beep is at
the volume you have set for the
loudspeaker.
Check the answer delay setting
1. Press and release .
The current setting will be announced and shown on
the display.
Audible message alert
When you have new messages, with the audible
message alert switched on, you will hear a beep every
10 seconds. The default setting is OFF.
With the answering machine ON and in standby mode:
1. Press and hold to change the setting.
The prompt will announce ‘Message alert on/off’ as
appropriate.
Outgoing messages
The outgoing message is the message a caller first
hears when the answering machine picks up their call.
There are 2 pre-recorded outgoing messages to choose
from (see note opposite) or you can record your own.
Skip
Skip
Setting up the answering machine
Answer and Record
The pre-set Answer and Record
outgoing message, that allows
your caller to leave a message, is
“Hello, your call cannot be taken
at the moment, so please leave
your message after the tone”.
Answer Only
The pre-set Answer Only outgoing
message, where callers hear an
announcement but cannot leave a
message, is “Hello, your call
cannot be taken at the moment
and you cannot leave a message,
so please call later”.