Operation Manual

11
5th Edition – 25th November 97
To answer a call
When the handset is on the base unit
When you receive an incoming call, the IN
USE light will flash and the base-unit will
ring.
• Pick up the handset, the CHARGING light
will go off, the IN USE light will remain on
but stop flashing and the TALK light will
come on. Do not press the
TALK button.
• After your call, either press the
TALK button,
or replace the handset on the base unit.
When the handset is not on the base unit
The handset does not need to be on the base
unit to receive a call. When you receive an
incoming call, the IN USE light will flash and
the CHANNEL SEEKER light on the handset
will flash momentarily, then the handset will
ring and the TALK light will flash.
• To answer the call, pick up the handset and
press the
TALK button. The IN USE light
and the TALK light will remain on but stop
flashing.
• After your call, either press the
TALK button
again or replace the handset on the base.
To use the Channel seeker
Your Freestyle 1100 Plus automatically scans
all the available radio channels for quality of
reception, and selects the best one to use.
If you experience interference during your
call, press the
CHANNEL SEEKER button to
select a different channel.
The channel seeker light will flash until the
selection has been made, you may then
continue with your call.
When the RINGER switch is set to OFF, the
base-unit will not ring .
Your Freestyle 1100 Plus has a back-lit keypad that
will come on or flash in use, to assist you when
the light is poor.
Using your Freestyle 1100 Plus
TALK
TALK
CHANNEL
SEEKER