Operation Manual

ManualsBrandsBT ManualsTelephonesFreestyle 1100 Plus

17

5th Edition – 25th November 97

To set the PIN code

Your Freestyle 1100 Plus can be accessed

remotely, by using the preset PIN code of

0,0,0. This allows access to the answering

machine from another telephone, see page 25.

If you wish to change this code

• Press and hold the

CODE button until the

unit announces, “Code setting… zero”.

• Press and release the

HOUR button until

you reach the number you want for the first

digit of your PIN code.

• Press the

CODE button. The unit will

announce “Accepted” and then “Zero” for the

next digit.

• Press and release the

HOUR button until

you reach the number you want for the

second digit of your PIN code.

• Press the

CODE button. The unit will

announce “Accepted” and then “Zero” for the

last digit.

• Press and release the

HOUR button until

you reach the number you want for the last

digit of your PIN code.

• Press the

CODE button. The unit will

announce “Accepted” and announce and

display the new PIN code.

CODE

DAY HOUR

MIN

OUTGOING MESSAGE

Using your Freestyle 1100 Plus

To call the base-unit from the handset

• Press the INTERCOM button on the handset.

The base-unit and handset will beep, the

INTERCOM lights on both will flash.

• To answer the INTERCOM call, press the

INTERCOM button on the base-unit.

• You can now speak using the handset and

the microphone located next to the

ANSWER ON/OFF button on the base-unit.

• To end the call, press the

INTERCOM

button on either the base-unit or the

handset. Both INTERCOM lights will go out.

You will not miss any incoming calls while the

INTERCOM is in use.

If an incoming call is received, the base-unit

will ring normally and can be heard through

the handset. To answer the call press the

TALK button on the handset, the intercom will

be cut off.