Operation Manual

20
5th Edition – 25th November 97
Using the answering machine
To set the day and time
You do not have to follow the complete
sequence, if for example you only want to
change the hour, you can follow the
instructions for changing the hour and skip
the rest of the instructions.
• Press and hold the
DAY button. The unit will
announce, “The day is… ”, then run through
the days of the week.
• Release the
DAY button when you reach the
current day. The unit will repeat the setting
and announce, “Accepted”.
• Press and hold the
HOUR button. The unit
will announce “The hour is… ”, then run
through the hours.
• Release the
HOUR button when you reach
the current hour. (The unit will announce,
“PM” after twelve mid-day). The unit will
repeat the setting and announce, “Accepted”.
• Press and hold the
MIN (minute) button.
The unit will announce, “The minute is… ”,
then run through the minutes.
• Release the
MIN button when you reach the
number of minutes past the current hour.
The unit will repeat the setting and
announce, “Accepted”.
To check the day and time
• Press and release the DAY button, the unit
will announce the current time and day.
To listen to the outgoing message
• Press and release the OUTGOING MESSAGE
button.
To record a new outgoing message
• Press and hold the OUTGOING MESSAGE
button. The unit will announce, “Please speak
after the tone, release the button to end
recording.”
• Start your outgoing message after the tone,
speak about 20 cm away from the
microphone which is located next to the
ANSWER ON/OFF button. The display will
countdown from “30” to “00”.
• Continue to hold down the
OUTGOING
MESSAGE button until you have finished,
then release the button.
• The unit will announce, “End of recording,
your outgoing message is...” and will play
back your outgoing message.
DAY HOUR
MIN
If you press and hold the button your
Freestyle 1100 Plus will give you a reminder on
how to set the time/day and how to record a new
outgoing message.
DAY HOUR
MIN
OUTGOING MESSAGE