Operation Manual

BT Freestyle 2100 ~ Issue 3 ~ 2nd Edition ~ 22nd July ’03 ~ 5563
14
To adjust the earpiece volume
There are 3 volume levels to select
from.
Press the PROG button.
Press the 4 button.
Press 1-3 to set the volume you want.
(1 is the quietest and 3 the loudest
volume setting.)
A beep sounds at each level you
press.
Press PROG to confirm.
To switch secrecy on and off
During a call:
Press the CLEAR button.
The display will show the icon.
Your caller cannot hear you.
Press the CLEAR button again to
return to your caller.
Secrecy
When you are on a call you can talk to someone
in the same room without your caller hearing.
Prog
Prog
4
G
H
I
Clr.
Clr.
To page your handset(s)
You can page your handset(s) from
the base station to alert a handset
user that they are wanted or to
locate a missing handset.
Press the PAGE button on the base
station. The handset(s) will begin
to ring.
Press the PAGE button again to stop
ringing.
You can also stop the ringing by
pressing the TALK button on the
handset. If you have purchased the
Freestyle 2100 Twin, pressing the
TALK button will stop the ringing at
that handset only.
Please note
When programming your Freestyle 2100,
the unit will give a double, two tone beep
after the successful sequence and a single,
long beep in the case of an error.