Operation Manual

To change the base unit ringer volume
• Press the OPTIONS button repeatedly until
the display shows
HI BASE RING. This is
your Freestyle 520 Plus default setting.
• Press the SELECT button to scroll through
the ringer volume options:
LO BASE RING - base rings quietly.
NO BASE RING - base does not ring.
HI BASE RING - base rings loudly.
• When the required setting is shown in the
display, press the
OPTIONS key repeatedly
until the handset gives a long beep, the
setting is stored and the display returns
to
HSET 1.
To set the dial mode
The dial mode setting of your Freestyle 520
Plus is set to
TONE which works with all
modernised exchanges. If you are on an old
exchange, set the phone to
PULSE.
• While the display shows HSET 1, press the
OPTIONS button repeatedly until display
shows
TONE.
• Press the SELECT button. The handset
display shows
PULSE.
Options
Select
Options
Select
If you are in doubt as to which is the correct setting
for you, contact BT free on FREEfone 0800 800 150
To switch the cordless handset ringer
on or off
• Press the OPTIONS button; the display
shows
SET followed by HS RING ON. This is
your Freestyle 520 Plus default setting.
• Press the SELECT button; the handset beeps
and the display shows
HS RING OFF.
• Press the SELECT button to move between
on and off.
• To exit the menu and confirm all settings
made, press the
OPTIONS button repeatedly
until the handset gives a long beep and the
display returns to
HSET 1.
Please remember that the option shown on the
display before pressing the
SELECT button is
the current setting. For example, if the display
shows
HS RING ON, it means that currently the
handset ring is
ON and pressing the SELECT
button will turn it OFF.
Options
Select
Network
Services
Freestyle
plus
You must lift the cordless handset off the base unit
in order to change any of the options settings.
HS RING ON
Setting up
13