Operation Manual

BT Lyric 2100 – Edition 3.1 – 24.03.04 – 5762
Make an external call
1. Lift the handset and press .
The green In Use light on the base flashes and the
Ext
icon is displayed.
2. When you hear the dialling tone, dial the number
you want.
Preparatory dialling
1. First enter the number to be dialled. The number
is shown on the display.
2. Press to dial the number. The display
shows
Dialling .
End a call
1. Press .
Or
Place the handset back on the base.
Receive a call
When the phone rings
External Call is displayed.
1. If your handset is on the base, pick it up to answer
the call.
Call timer
Your handset will automatically
time the duration of all external
calls. The handset display shows
the call duration both during and
for a few seconds after your call.
Press to delete any incorrect
digits
The symbol on the display
indicates when you are in range of
the base. If the symbol flashes and
you hear a warning beep, you are
out of range and will need to move
closer to the base.
Caller Display
If you have subscribed to your
network’s Caller Display service,
the caller’s number (or name if
stored in the directory) is
displayed. See page 30 for more
information.
Auto answer
As long as you have auto answer
set to ON you can just pick the
handset up off the base to answer
the call. If you have switched it off,
you will need to press the .
Auto answer is the default setting.
Using the phone 13
5762 BT Lyric 2100 UG [3.1] 2/6/04 3:31 pm Page 13