Operation Manual

28
BT Lyric 2100 – Edition 3.1 – 24.03.04 – 5762
Auto answer
If you set Auto Answer to ON, when you receive an
incoming call and the handset is in the base, you
can pick it up to answer the call. You do not need to
press .
1. Press or until
Handset Settings is displayed
then select OK option.
2. Press or until
Auto Answer is displayed then
select OK option.
3. Select either the
Off or On option.
You will hear a confirmation tone.
4. Press and hold to exit and return to standby.
Handset name
You can give your handset a name to personalise if you
are using more than one handset. The maximum number
of characters is 10.
1. Press or until
Handset Settings is displayed
then select OK option.
2. Press or until
Handset Name is displayed then
select OK option.
3. Press to delete unwanted characters and enter a
new name using the keypad.
Handset settings
5762 BT Lyric 2100 UG [3.1] 2/6/04 3:31 pm Page 28