Operation Manual

5
Registering your handset
Up to six handsets can be registered and operated
from any one base. This allows you to make internal
calls between two handsets while a third is making
an external call.
Each handset can also be registered on up to four
bases.
Each additional handset you purchase must
be registered to a base.
At the base:
Press and hold down the button on the base
until it starts to flash.
On the handset:
Press the OK button.
Press the 6 button.
The handset will now automatically register
with the handset number.
COK
6
Press the INTERCOM button.
Press the OK button.
F1 will appear on the display.
Press the 3 button then the 3 button again.
will appear on the display.
Enter the System Code.
All registered handset numbers are
displayed.
Enter the number of the handset to
be de-registered.
Init = ok6 will appear on the de-registered
handset.
Press the C button twice.
33
CODE
COK
COK
Intercom
Use the UP or DOWN button to select the
base number ie. 1234.
Press the OK button.
Enter the System Code.
Wait until the available handset numbers
appear. ie. 234. Then press the handset
number that you want.
COK
CODE
▲
▼
Using additional handsets
and bases
Registering Classic handsets
At the base:
Press and hold down the button on the base
until it starts to flash.
On the handset:
Press the OK button.
Press the 9 button.
COK
9
To register a Classic handset to a base
(if you have changed System code
from 0000)
To de-register a Classic handset from
the base
At the base:
Press and hold down the PAGE button on the
base until it starts to flash.
Registering Executive handsets
To register an Executive handset to a base
station (if you have not changed the
System Code from 0000)
To register a Classic handset to a
base station (if you have not changed
System Code from 0000)
On-Air1000Classic/Exec(145x181) 15/8/00 5:42 pm Page 5