Operation Manual

On-Air 1100 Classic user guide ~ Edition 4.4 ~ 21st July ‘00
10
Press the INTERCOM button.
Press the OK button. F1 will appear
on the display.
Press the 3 button followed by the
1 button.
Enter existing code (default setting
0000). As you enter each digit in turn
the dash will stop flashing. When you
have entered four digits all four
dashes will then start flashing again.
Enter your new System Code. As you
enter each digit in turn the dash will
again stop flashing.
Enter your new System Code again.
Press the C button twice to exit.
System Code
Your base station has a default setting of 0000
but you may want to change this to prevent
unauthorised use of the handset.
If you change your System Code keep record
of the new number by writing it in the space
provided on page 3.
Base station priority
If you are using multiple bases, you can select
which base your handset will use.
Base settings
To change your System Code
3 1
COK
COK
Intercom
OLD
CODE
NEW
CODE
CONFIRM
CODE
Press the OK button.
Press the 7 button.
Use the UP and DOWN buttons to
select the base you require.
The flashing digit on the left of the
handset is the base number.
Press OK to confirm.
To change base station priority
7
COK
COK
▲
▼
Press the INTERCOM button.
Press the OK button.
Press the 1 and 3 buttons.
Use the keypad to input the date
DD/MM/YY.
Press the C button twice to exit.
To set the date
1 3
123
456
789
COK
COK
Intercom
Press the OK button.
Press the 2 button.
Use the UP and DOWN buttons to
select the volume you require.
Press OK to confirm.
Ringer volume
2
COK
COK
▲
▼
Press the OK button.
Press the 1 button.
Use the UP or DOWN button to
select 1 for ringer active or 2 for
silent ring.
The display will show the symbol
to indicate a silent ring.
Press OK to confirm.
Silent ring
1
COK
COK
▲
▼
Press the OK button.
Press the 3 button.
Use the UP or DOWN button to
select the melody you require.
Press OK to confirm.
Ringer melody
3
COK
COK
▲
▼
On-Air 1100 Classic 15/8/00 5:26 pm Page 11