Operation Manual

On-Air 1100 Classic user guide ~ Edition 4.4 ~ 21st July ‘00
14
Generally this telephone may be connected to
switchboards which support tone signalling
and timed break recall. In the event of any
difficulties please consult your switchboard
service provider.
Now you must set the number of digits
required to make internal calls to other
extensions on your switchboard.
Switchboard compatibility
When you connect your telephone to a
switchboard, you can set the switchboard’s
external line access code so that when you
make an external call using the handset
directory or redial list the code is
automatically dialled before the number.
Switchboard External Line
Access Code
Press the INTERCOM button.
Press the OK button.
F1 will appear
on the screen.
Press 2. Press 4. Press 1.
The access code is displayed.
Press the OK button.
Enter or correct the switchboard
external line access code, e.g. 9. You
can enter codes up to 8 digits in length.
Press OK to store.
Press the C button three times to exit.
To set the external line access code
2 4 1
COK
COK
COK
COK
Intercom
Press the INTERCOM button.
Press the OK button.
F1 will appear
on the screen.
Press 2. Press 4. Press 2.
The number of digits is displayed.
Press the OK button.
Enter or correct the number of digits
you dial to make internal calls to
other extensions on your switchboard.
Press the C button three times to exit.
To set the number of digits
2 4 2
COK
COK
COK
Intercom
Note
For the external line access code to be
dialled for external calls only it is important
that all external numbers stored in your
handset memories must contain more digits
than the number of digits required to make
an internal call to other extensions on your
switchboard.
This is most likely to occur when you have
local external numbers stored in the handset
memories without the area code. To
overcome potential problems ensure that all
numbers are stored complete with area code.
Press the INTERCOM button.
Press the OK button.
F1 will appear
on the display.
Press 2. Press 4. Press 3.
Use the UP or DOWN button to
select 0 to de-activate, or 1 to
activate.
Press OK to store.
Press the C button three times to exit.
To activate and de-activate the
external line access code
2 4 3
COK
COK
COK
Intercom
▲
▼
On-Air 1100 Classic 15/8/00 5:26 pm Page 15