User`s guide

103 - Restoring Your Pre-installed Software
BOOT Priority Change
Before restoring an image, you must first verify that the system is set up to boot from the DVD drive. To
verify/change the boot-up priority (rather than booting-up from the hard drive or an external floppy disk
drive), perform the following steps:
1 Power on your system. When the Fujitsu logo appears on the screen. press the [Enter] key or click on the left
mouse or touchpad button; the TrustedCore Menu will appear.
2 Select the Boot Menu from the TrustedCore Menu by pressing the [Fn] button while pressing the down arrow
button.
3 If “Optical Media Drive”, “CD-ROM Drive”, or “CD/DVD Drive” is not at the top of the list, arrow down to the drive
in the list, and press the [OK] button.
After you have changed the boot priority, you can restore a backup image when booting up.
Procedure
1 Turn on the power to your system.
2 Ensure that you have a device that can read DVDs either installed in your system or attached externally to it.
3 Insert the Restore Disc into the drive tray.
4 Reboot your system.
After the system reboots, follow the instructions that appear to restore your operating system, erase all
data from your hard disk, or create or resize partitions on the hard disk.
• THE USE OF THIS DISC REQUIRES THAT YOU HAVE A DEVICE CAPABLE OF READING DVDS ATTACHED TO YOUR
SYSTEM. YOU WILL NEED TO ATTACH AN EXTERNAL PLAYER. FOR MORE INFORMATION ON AVAILABLE EXTERNAL
DEVICES, VISIT OUR WEB SITE AT: US.FUJITSU.COM/COMPUTERS.
• THIS DISC CAN ONLY BE USED WITH THE SYSTEM WITH WHICH IT WAS PURCHASED.