Operation Manual

33
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
Registering additional
handsets
You can use up to five BT Studio 4100 Plus handsets with your
BT Studio 4100 Plus base to extend your phone system without
needing to install telephone extension sockets for each new phone.
If you have purchased a BT Studio 4100 Plus multiple pack any
additional handsets come pre-registered to the base.
If you have purchased an additional handset separately you must
register it to your BT Studio 4100 Plus base before it can be used.
Registering a handset
1. Press the button then
or
until regiSTraTiOn
is displayed, then press
.
2.
Pin? is displayed. Enter the base PIN (original setting=0000)
and press
.
3. The handset will display
Searching, press and hold the
button on the base until you hear a long beep and the green
In use light begins to flash.
4. The handset will temporarily display
regiSTereD then will
display
hanDSeT.
When the registration has succeeded, the handset is
automatically assigned the next available handset number.
Registering another make of handset
to your BT Studio 4100 Plus base
If you want to register another make
of handset (i.e. not a BT Studio 4100
Plus handset) to your BTStudio 4100
Plus base then you will need to
follow the Registration instructions
that came with the handset first and
then continue with the base part
of the registration procedure (as
shown opposite from point 3). Please
note that registering other types
of handset will only provide limited
compatibility i.e. you may only be
able to make and receive calls on the
additional handset.
You have 60 seconds to complete the
registration process.
If registration is not successful first
time, please repeat the process again
in case the base registration period
ran out of time.
If there are already 5 handsets
registered to the base, the
registration will fail. You must
de-register (delete) another handset
before you can register the new one.
See page 28, “Delete handset”
for instructions.