Operation Manual

Verve 3000 user guide ~ 3.1 Edition ~ 14th October ’02 ~ 4805
26
Press the OK options
button.
Press the DOWN
navigation button until
KEY BEEP is displayed.
Press the OK options
button,
BEEP ON is
displayed.
To switch ON or OFF
press the UP or DOWN
navigation button until
your required choice is
displayed.
Press the Save options
button.
You will hear a
confirmation tone.
Press the RED PHONE
button to return to the
idle display.
OK
▼
OK
▲
▼
Save
Press the DOWN
navigation button until
SETTINGS is displayed.
Press the OK options
button.
Press the DOWN
navigation button until
SELECT BASE is displayed.
Press the OK options
button, your current base
selection is displayed e.g.
BASE 1 .
If your handset is
registered to more than
one base press the DOWN
navigation button to select
one of the other base
stations (
1 , 2 , 3 , 4 , AUTO ).
Press the OK options
button.
To select a base
You are able to register
your Verve 3000 Executive
handset to 4 bases.
If your handset has been
registered to more than
one base you can select
which one it uses.
Press the Menu options
button.
Menu
▼
OK
▼
OK
OK
▼
Note
If
AUTO is selected the handset
will automatically link to another
base with a strong signal if the
signal it is currently receiving from
its present base becomes very poor.
When you have selected the base
station the handset will try
locating the base, the display will
show
SEARCHING until it is located.
HANDSET SETTINGS