Operation Manual

PBX/switchboard access code
1. Press
Menu , scroll to Settings and press OK .
2. Scroll to
Base settings . Press OK .
3. Scroll to
PBX access . Press OK .
4. Enter the code you want, then press
OK .
5. Press
Back to return to the previous menu level.
System PIN
1. Press
Menu , scroll to Settings and press OK .
2. Scroll to
Base settings . Press OK .
3. Scroll to
System PIN . Press OK .
4. Enter the old PIN (original setting 0000) and press
OK .
5. Enter the new PIN and press
OK .
6. Re-enter the new PIN and press
OK .
7. Press
Back to return to the previous menu level.
35Settings
If you experience any problems, please call the Helpline on 0800 218 2182* or email [e-mail]
If you enter your PBX access code your
B
T Verve 410 will automatically enter a
pause after the first digit if it matches
the PBX access code.
If any existing code is displayed.
Press Clear to delete digits.
The S
ystem PIN is used when changing
certain settings and registration / de-
registration. The default setting is
0000. You can change this to your own
preferred 4-digit number.
If you make a mistake, press Clear to
delete digits.