Operation Manual

58
If you experience any problems, please call the Helpline on 0800 218 2182* or email [e-mail]
No display
• The batteries may be flat, dead or incorrectly inserted.
•
Recharge or replace the batteries
icon flashes
• Is the handset registered correctly to the base, see page 53.
• Check that the mains power is correctly connect
ed.
• Check that the handset is within range of the base.
• The batteries are low, place the handset on the base/charger to recharge.
icon not scrolling
• Tr
y cleaning the charging contacts.
• Check that the mains power is correctly connected.
You hear the busy t
one when you press
• Make sure the handset is in range of the base.
•
Another handset registered to your BT Verve 410 base may be on the line.
No Caller Display number/name displayed
• Have you subscribed to a Caller Display service from your network provider, see page 39.
•
The caller may have withheld their number.
• An exact name/number match was not found in your directory. Check that you have stored the
full STD dialling code.
Help