2014 www.manntel.com High Technology Training System Man & Tel Co., Ltd.
Man & Tel Co., Ltd is a venture-enterprise company developing high Technology Tranining System and communication terminals. 2 A group of RF Design / Antenna / Microwave Training System Model: RFDT-1000 / MW-1000 / MW-2000 / MW-5000 / MATS-1000 / WATS-2002 A group of Mobile Communication Trainers Model: MT-3000 13 A group of Network Communication Training System Model: ERT-5000 / WLAN-TS-1000 / WLAN-VP-1000 17 23 A group of RFID Training System Model: RFID-13.
A Greeting from the CEO Man & Tel is an INNO-BIZ company and venture-enterprise which develop high-tech educational systems and medical devices and equipment for rehabilitation Man & Tel does the educational equipment development business to develop advanced educational equipment in connection with IT technology to contribute to education of commercialization technology and state-of-the-art education.
A group of RF Design / Antenna / Microwave Training System RFDT-1000 / MW-1000 / MW-2000 / MW-5000 MATS-1000 / WATS-2002 These equipments provide trainees with chance to design, manufacture and measure microwave communication system by applying microwave designing theory. Also, experiments on standing wave, fading, wave loss, doppler effect are provided to help trainees understand characteristics and radio patterns of various antennas in addition to wave features in mobile communication.
RF Design Technology Trainer Model: RFDT-1000 RFDT-1000 Features 1. Helps users acquire basic RF circuit designing skills. 2. Helps users acquire RF module manufacturing skills. 3. Provides RF circuit measuring practices. 4. Provides chip components' value measuring practices in high frequency band. RFDT-1000 helps users understand basic and important techniques of RF circuit design through theories, manufacturing practices and measuring practices.
A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n Microwave Communication Trainer Model: MW-1000/ MW-2000 / MW-5000 An experimental equipment to educate Microwave Component Design, Manufacturing, and Measuring techniques include Microstrip line theory and Microwave device design theory. 4 Man & Tel Co., Ltd.
Microwave Experiment Kit Model: MW-1000 MW-1000 Function 1) Study the microstrip line design theory 2) Study the basic theory of microwave component 3) Microwave component design & simulation 4) Microwave component manufacturing 5) Microwave component measurement 6) Microwave component analysis of characteristics MW-1000 Characteristics Experiment in Microwave component design and Manufacturing & Measurement using microstrip line theory.
Microwave Communication Trainer (2.4GHz) Model: MW-2000 AN 50178251 0001 [March 30, 2010] MW-2000 Features Allowing students to train themselves about Experiment in microwave components design and manufacturing & Measurement applying microstrip line theory and microwave device design theory. For these experiment, standard devices and Specification & documents are supplied with software program as reference.
Microwave Communication Trainer (5.8GHz) Model: MW-5000 MW-5000 Functions - Communication using the Microwave system - Measurement in Microwave system - FSK Modulation & Demodulation in Microwave band - File transfer and data transmission at 5.8GHz - Understanding of the microstrip line design theory - Understanding of the basic theory of microwave devices - Design and simulation of Microwave devices - Experiments in manufacturing and measurement of Microwave devices.
A L e a d e r i n n e w T e c h n o l o g y Antenna Training System Model: MATS-1000 MATS-1000 includes RF Signal source of 0.3~6GHz. It’s used to educate Antenna Characteristics, Gain, Radiation Pattern, Impedance Matching and to Design & Manufacture Antenna. 8 Man & Tel Co., Ltd.
Antenna Training System MATS-1000 Features Model: MATS-1000 1. RF signal generator is included 2. Practice for Antenna characteristics is possible 3. Signal frequency and Output power is variable. 4. Suitable for training Antenna design, manufacturing, measurement. 5. Practice is possible without extra measuring equipment 6. Auto calibration is included to set maximum input power position. MATS-1000 Training contents Part 1. Introduction and Installation of Program Chapter 1.
A L e a d e r i n n e w T e c h n o l o g y Wave and Antenna Training System Model: WATS-2002 An experimental equipment to educate electromagnetic wave propagation in mobile communication and Antenna characteristics such as Radiation patterns, Fading and Propagation loss, etc. 50178247 0001 [March 30, 2010] 10 Man & Tel Co., Ltd.
Wave and Antenna Training System Model: WATS-2002 Antenna Antenna Mounter Main Body Antenna Base Control Unit (Computer) WATS-2002 Features Spectrum Analyzer and Laptop are purchased optionally. Wave and Antenna Training System Model. WATS-2002 An experimental equipment to educate electromagnetic wave propagation in mobile communication and Antenna characteristics such as Radiation patterns, Standing wave, Fading(Phase delay and attenuation), Doppler frequency and Propagation loss.
Wave and Antenna Training System Model. WATS-2002 WATS-2002 Training Contents Part 1. Introduction and Installation of Program Chapter 1 Introduction of WATS-2002 Chapter 2 Program Installation and Instruction Part 2.
A group of Mobile Communication Trainers MT-3000 These equipments provide instructions on basic concepts of mobile communication to students who study for mobile communication, information technology and electronics. Equipments for experiment on mobile communication MT-3000 A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n www.manntel.
A L e a d e r i n n e w T e c h n o l o g y MOBILE Telecom Trainer Model: MT-3000 An experimental equipment to educate basic concept of the Full Duplex wireless system and Mobile telecommunication. [November 23, 2010] 14 Man & Tel Co., Ltd.
MOBILE Telecom Trainer Model: MT-3000 MT-3000 Features Full Duplex Voice & Data Communication Half Duplex Voice & Data Communication Practice of RF interference & mobile environment Chatting by using Computer. Board level and full system level experiment is available using one set Auto Mode and Manual mode can be selectable Built-in Software equal to the Commercial Products. Operating like as Commercial Mobile Products in Auto Mode. 16 x 2 Character LCD. LED Indicator. Over Charge Protection.
MOBILE Telecom Trainer MT-3000 Training Contents Model: MT-3000 Part 1. Introduction of Products Experiment 1. Full Duplex Mobile Telecommunications Lab Equipment Experiment 2. Power Part Part 2. Audio Frequency Part Experiment 3. Condenser Mike and Limiter Experiment 4. Compressor Experiment 5. Pre-emphasis and De-emphasis Experiment 6. Expander Experiment 7. Band-Pass Filter and Squelch Circuit Part 3. Radio Frequency Part Experiment 8. PLL Oscillator Ⅰ Experiment 9. PLL Oscillator Ⅱ Experiment 10.
A group of Network Communication Training System ERT-5000 / WLAN-TS-1000 WLAN-VP-1000 Wireless LAN Video Processing Training System Wireless LAN Training System WLAN-VP-1000 Embedded Network programming and Configuration WLAN-TS-1000 ERT-5000 A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n www.manntel.
A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n Wireless LAN Training System Model: WLAN-TS-1000 WLAN-TS-1000 Features 1) Wi-Fi practice board Wireless standards : IEEE802.11b/g/n Frequency range : 2.421~2.485GHz Data transmitting speed : 54Mbps ~ 1Mbps Serial cable connection to Wi-Fi Server Target Socket connection : Max 5 sec Best security via 64/128bit WEP, WPA, WPA2 Simple AT command practice 2) Wireless LAN Protocol Analyzer The ability to capture : Protocol capture to 802.
WLAN-TS-1000 is a training system to educate the basic WLAN technology, WLAN protocol analysis, integrated operation with peripheral devices. Wireless LAN Training System is a advanced technology education equipment for Wi-Fi environment set-up experiment and protocol analyzing training through lessons about Wireless LAN (802.11 b/g) concept and experimental environment configuration practices.
A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n Wireless LAN Video Processing Training System Model: WLAN-VP-1000 WLAN-VP-1000 is a training system to educate the basic WLAN technology, WLAN protocol analysis, WLAN configurations and video based applications using Wireless IP camera.Wireless LAN Video Processing Training System is an advanced technology education equipment to learn WiFi standards and protocol analysis.
WLAN-VP-1000 Specifications 2) Wireless IP Camera - Image Sensor & Lens 1) Wireless Router - Wireless Item Standard Access type Transmission method Frequency Range Data rate Set up Environment Antenna Security Access Mode Wireless bridge Description IEEE802.11n (draft 2.0), IEEE802.11g, IEEE802.11b CSMA / CA DSSS, OFDM, MIMO 2,412MHz - 2,462 MHz (Channels 1 - 11) 802.11b - Max. 11Mbps 802.11g - Max. 54Mbps 802.11n - Max. 300Mbps Web based User Interface 802.
Embedded Router Trainer Model: ERT-5000 [November 17, 2010] ERT-5000 Features This is an educational equipment which enables user to have training over Network Configuration and Embedded Programming Practice on Internet Environment. 1) Embedded programming practice of TCP / IP protocol suite 2) Network configuration practice based on Router 3) TCP / IP protocol analysis 4) Embedded program porting practice ERT-5000 Training contents Vol.
A group of RFID Training System RFID-13.56 / RFID-EPC / RFID/USN-6000 RFID-3000 / RFID-5000 These equipments provide instructions on basic concept, protocol, programming and hardware of RFID, as well as practical techniques used in RFID applied shopping system and administration of physical distribution.
A L e a d e r i n n e w T e c h n o l o g y RFID Trainer Model: RFID-13.56 Helps to comprehend configuration and process of the RFID system and enables hardware manufacturing and programming experiment. 24 Man & Tel Co., Ltd.
RFID-13.56 functions •Comprehension of basic principle of RFID •Comprehension of RFID system design skill •Comprehension of ISO 15693 protocol •Comprehension of Anticollision •Comprehension of reader configuration •Comprehension of RFID application programming Read / Write experiment •Comprehension of 128bit encryption which was applied to RFID system RFID-13.56 training contents Part1.
A L e a d e r i n n e w T e c h n o l o g y RFID-EPC Global Trainer Model: RFID-EPC RFID-EPC is an experimental equipment to educate Protocol and Programming for EPC Global Network, Middleware application, Encryption. 26 Man & Tel Co., Ltd.
RFID-EPC Features This RFID Training system presents the RFID operation and standardization processes. There are one types of tags active tag(915MHz). Active tags has a built-in power supply that allows long-distance communication reaching to 13 meters. 1. Training using EPC Global Network 2. Practice for EPC Global Network Theory - Protocol Exercise between Reader and Tag - Middleware Programming RFID-EPC Functions 3. Practice for Tag Data read/write 4. Mapping Tag Data to real product 5.
A L e a d e r i n n e w T e c h n o l o g y RFID/USN Training System Model: RFID/USN-6000 RFID/USN-6000 is an experimental equipment to educate EPC Global Network, RFID/USN theory & Programming, Middleware application and Sensor data conversion. 28 Man & Tel Co., Ltd.
RFID/USN-6000 Training Contents Part 1. Introduction of RFID/USN Chapter 1 USN Technology based on RFID Chapter 2 Hardware Structure and Setup Chapter 3 Software Installation and Practice Part 2. Packet Structure for RFID/USN Implementation Chapter 4 Packet Structure of Class 1 Gen. 2 Air Interface Chapter 5 Middleware Packet Structure Part 3.
RFID Shopping System Model: RFID-3000 RFID-3000 Features RFID Shopping System, which could replace the Bar-code system, can be actually applied to commercial products as well as educational use. RFID Shoppiong System is not the system identifing each product's price one by one like bar-code system but the system identifing the whole items at short time through its technology. That is, Reader identifies every goods' price at one time through Tags which are attached to every goods.
RFID Logistic System Model: RFID-5000 RFID-5000 Features By deploying RFID Reader and Antennas to the path where the goods are input and destributed, user could know the followings ; 1) ordering status from PC monitor which RFID operation S/W is downloded 2) input information of goods such as item, price and quantity. 3) stock status which is stored into the rack 4) inferior goods information which is sorted out while moving from input conveyor belt to rack.
A group of Bluetooth Telecom Training System BT-2007 / BT-3000 / BT-1000 BEHK-100 / MBS-100 Bluetooth Bluetooth stereo stereo earset earset This equipment provides step-by-step instructions on bluetooth techniques from its basic program and hardware operation to commercial products of Bluetooth MBS-100 Equipment for experiment on Bluetooth embedded headset Wireless control for Industrial products BEHK-100 Equipment for experiment on Bluetooth communication BT-3000 BT-2007 32 A L e a d e r Man &
A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n BLUETOOTH Telecom Trainer Model: BT-2007 An experimental equipment to educate Bluetooth technology for software protocol stack and hardware through step by step experiment. SIG : Approval [QPN-BMTK-040004] 33 www.manntel.
BT-2007 Features Protocol Analysis and Simulation / Emulation Protocol Training - Protocol Processing Procedure - Protocol Learning - Protocol Signaling Profile Training - Profile Learning - Profile Signaling - Profile Processing Procedure Demo Function - Audio Conversation - File Transfer - Chatting Data Communication Experiment Using Various Interface. (USB, UART) Hardware Experiment is Available. Multi Purpose Usage. (Education, Research and Development) Bluetooth Host Programming.
BLUETOOTH Telecom Trainer Model: BT-2007 BT-2007 Training Contents Part I Introduction Overview 1. Practice 1. What is Bluetooth Installation Settings & Application Software Part II Hardware Practice 2. Practice 3. Practice 4. Practice 5. Power Interface Codec RF Module Part III Bluetooth Protocol Monitoring I. HCI Protocol Monitoring Practice 6. HCI Initialization and Inquiry Practice 7. HCI Connection Practice 8. HCI Disconnection Practice 9. HCI Data Transmission II.
A L e a d e r i n n e w T e c h n o l o g y & Wireless Embedded Training System Model: BT-3000 An experimental equipment to educate Wireless control, Embedded system, Telemetric and Industrial product control. 36 Man & Tel Co., Ltd.
BT-3000 Features Wireless Embedded Training System, BT-3000 was developed to educate wireless control and embedded technology. Its distinguished technology compared to wired embedded system is wireless control using Bluetooth protocol. Wireless embedded technology will be used in application of Home networking, Ubiquitous sensor networking, Telemetric and Industrial control in near future. Through experiment using BT-3000 students learn hardware design and wireless communication protocol easily.
Wireless Embedded Training System Model: BT-3000 BT-3000 Training Contents Part I. Introduction Chapter 1 Introduction to Wireless embedded System Chapter 2 Understanding of the PIC Microcontroller Chapter 3 Understanding of the Server Program and Its Operational principle Chapter 4 Understanding of the Bluetooth Technology Part II.
BLUETOOTH Embedded Headset Kit Model: BEHK-100 BEHK-100 Features Experiment for the Commercial Product developing process. Using Commercial software program released with products. Hands on practice for the program coding. BEHK-100 Functions Provide three experiment contents - Volume control - Audio control - LED control Manufacturing experiment of a Kit Learn program usage and coding Application experiments and answers are supplied BEHK-100 Contents Ⅰ. Embedded Software Setup Guide 1. Introduction 2.
BLUETOOTH Stereo Earset / BLUETOOTH Stereo Gateway Model: MBS-100 / MBS-110 This product contains wireless stereo earset and stereo gateway using BLUETOOTH technology You can enjoy wireless phone call and music with MBS-100 connected to BLUETOOTH embedded cell phone. Also, by using stereo gateway it can be connected wirelessly to TV, MP3, PC and audio set in addition to the cell phone Maximum transmission distance between earset and cell phone or gateway can be changed by environment and machinery used.
A group of Ubiquitous Home Network Training System BHN-1000 / BCT-100 / UHN-3000 UHN-5000 These equipments are sweet home network practice system including various wire/wireless control. Also, basic experiment on basic control and communication are available in many ways.
A L e a d e r i n n e w T e c h n o l o g y & BASIC Home Network Trainer Model: BHN-1000 BHN-1000 is an experimental equipment to educate Basic Embedded system including C-language Programming and Control, connected with Sensors & Commercial products. 42 Man & Tel Co., Ltd.
BHN-1000 Training Contents BHN-1000 Features 1. BHN-1000 equipment use ATMEGA-128 MPU ( low-Power, highperformance). User can study micro-processor Programming, embedded I/O control and RS-485,RS-232C, Ethernet communication programming. 2. BHN-1000 designed to help embedded programming study. This equipment have many interesting devices to use. ( 2-line text LCD, LED, Buzzer, Thermometer, EEPROM etc..) And this equipment have external 32Kbytes SRAM, so users doesn’ t need to worry about large program. 3.
A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n BASIC Communication Trainer Model: BCT-100 BCT-100 is an experimental equipment to educate Microprocessor, Embedded system, C-language Programming, Control, Ethernet & Network Communication. 44 Man & Tel Co., Ltd.
BCT-100 Functions Wired communication / monitoring - RS-485 ( 2 Channel 4 ports) - RS-232C ( 1 port ) - Ethernet ( 1 port ) Remote control by Infrared RX/TX 220V AC, 5V DC On/Off control by Relay port 2 bit Digital In/Out port (Direct connection to MPU) 2 Channel Analog Input (Direct connection to MPU 2 Line Text LCD, 4 Push Keys, Buzzer, LED User Interface support BCT-100 Training Contents BCT-100 Features 1. BCT-100 equipment uses ATMEGA128 MPU ( low-power, high-performance).
A L e a d e r i n n e w T e c h n o l o g y & Ubiquitous Home Network Trainer Model: UHN-3000 This system includes various wired control and wireless control, which is built for home network experiment. 46 Man & Tel Co., Ltd.
UHN-3000 Features This U-Home Network system, which uses wireless technology, is completely different from those products with wire-based technology. Wireless technologies embedded such as Bluetooth, IR and etc, in the equipment and Ehternet communication (wired and Wireless) technology is added on for network communication. It also includes wire-based control by using PLC, which enables real-time control of the system.
Ubiquitous Home Network Trainer Model: UHN-3000 Training Contents 1. System Control practice by the command Host System ETHERNET UART ETHERNET 2. Programming practice Client System Client System USB UART JTAG Emulator Host System Source tracing Command Programming Command Practice for Home network Control 1. For users who does not know C programming => Users does not need to know C programming for control UHN-30000 I/O module and sensors . UHN-3000 support command control mode via UART/Ethernet.
Ubiquitous Home Network Trainer Model: UHN-3000 5. UHN-3000 Training Contents Ubiquotous Home Network System Practice 1. Introduction to UHN-3000 Test system 2. Understanding Home network process and Practicing its operation 3. Practicing Home network Digital data output 4. Practicing Home network Digital data input 5. Understanding and Practicing the principles of analog sensor operation 6. Understanding and Practice of the operating principle of relays 7.
Ubiquitous Home Network Demo System Model : UHN-5000 UHN-5000 Demo Functions 01. Audio (Remote control) : On/Off, Volume Up/Down 02. TV (Remote controller) : On/Off, Channel Up/Down 03. Fingerprint scanner (Remote controller) : Access/Not 04. DoorLock (Remote controller) : Open/Closed 05. Microwave oven (BHN relay) : On/Off (Led display) 06. Humidifier connection 07. AC incandescent stand (Phase control) : Brightness control 08.
A group of Ubiquitous Sensor Control Traniners ZT-200 / USC-5000 / USC-7000 / USN -1000 USN Trainer This equipment is based on bluetooth and zigbee technology. It provides instructions on techniques used in future home networking, ubiquitous, telemetics and industrial setting management through various experiments on applied area of sensor, motor and power.
Zigbee Trainer Model: ZT-200 ZT-200 provides experiment on Zigbee communication and sensor network based on Zigbee combined with various sensors Ethernet ZC PC Features of ZT-200 ZED Experiments on features of various sensors and control of house appliance are available through Zigbee module Experiment on sensor network through Zigbee module is provided Various Expansion through expansion ports is available Experiment environment is constructed in low price by using free compiler Contents of ZT-200 tex
A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n Ubiquitous Sensor Control Trainer Model: USC-5000 53 www.manntel.
Motor USB Power Power Master Software program USC-5000 Training Contents 1) Slave Contents Part I. Introduction Wireless Chapter 1 Introduction to Ubiquitous Wireless Control System(USC-5000) Chapter 2 Understanding of the PIC Microcontroller Chapter 3 Understanding of the Server program and Technology of its operational principle Chapter 4 Understanding of the Bluetooth Technology Part II.
Ubiquitous Sensor Control Training System Model: USC-7000 It can be connected to several clients through one server, and useful (gainful) to build an ubiquitous sensor control experimental lab. USC-7000 Features USC-7000 Training Contents ▶ USC 7000 system is composed of one Server(Master) and some Clients(Slave). One Server(Master) has 10 ports to be connected to each computer. One Server(Master) can communicate with 10 Clients(Slave) using 10 computers through one by one matching.
A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n USN Trainer USN-1000 Educate basic concept of USN Technology to Programming, Hardware practice of Real Time Wireless Sensor Network based on Tiny OS to Atmosphere Environment System, Water Environment System, and Fire Prevention System. 56 Man & Tel. Co.
USN Trainer USN-1000 USN-1000 Features USN-1000 Functions 1) Understanding USN Basic Principle 2) Training USN System Design Technology 3) Practice for IEEE802.15.4 Zigbee Communication 4) Training 6LoWPAN 5) Training Tiny OS Program 6) Training Various Sensor Node Practice 7) Training Practice for Application (Monitoring of Various Environment and Water Quality etc.
A group of Microprocessor Embedded Trainer MBT-100 / MBT-200 / MBPT-1000 / MBPT-2000 / ANDRO-1000 This Embedded training system is used for basic Hardware manufacture & basic CPLD programming and also used for basic Communication & control of various types of Sensors, using Microprocessor.
A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n Microprocessor Basic Trainer Model: MBT-100 MBT-100 is a training system providing hardware manufacturing practices, external module control practices, I/O control practices using microprocessor and practices regarding applications of home security & RFID technology. 59 www.manntel.
Microprocessor Basic Trainer MBT-100 MBT-100 Training Contents Part 1. Introduction Chapter 1 Introduction to MBT-100 trainer Chapter 2 Build up practice environment Part 2. Basic hardware practices Chapter 3 Structure of ATMEGA 128 Chapter 4 Assembly and operation practice of ISP Chapter 5 Assembly and operation practice of RS232 Chapter 6 GPIO connection and LED operation practice Chapter 7 Checking RFID reader's operation Chapter 8 Checking text LCD's operation Part 3.
A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n Microprocessor Application Training System Model: MBT-200 61 www.manntel.
Microprocessor Application Training System MBT-200 MBT-200 Features MBT-200 Functions 1. MBT-200 is designed as an experiment and practice system for electricity, electronics, computer, communication, and control and is suitable for students beginning with 8bit microprocessor. 2. Character LCD, DC Motor, Step Motor and sensors are employed for training basic functions and programming of ATMEGA128 3.
A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n Basic PLD Trainer Model: MBPT-1000 MBPT-1000 is a training system providing basic logic circuit practices, stop watch/DC motor control practices and other practical trainings on Xilinx ISE and Altera Quartus. 63 www.manntel.
Basic PLD Trainer MBPT-1000 MBPT-1000 Functions 1. Users can develop project with various sensor modules and applications. 2. Automatic equipment status checking function 3. Easy monitoring function by supporting USB 2.0 4. Users can connect and control external equipment through extended GPIO pin.
PLD Application Training system Model: MBPT-2000 MBPT-2000 Features MBPT-2000 Functions 1) Basic training on FPGA and 7 different peripheral devices. 2) Application exercise like wireless RC CAR auto & manual drive mode practice. 3) Coding exercise using VHDL 4) connection and control of external equipment using extended GPIO. MBPT-2000 Training contents Chapter 1. VHDL basic in-/output Chapter 2. AVR in-/output port INTERFACE Chapter 3. AVR universal(GPIO) port INTERFACE Chapter 4.
A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n Embedded Training System Model: ANDRO-1000 Features of ANDRO-1000 An Android development board which perfectly implements an up-to-date tablet environment Provide a QR Code text for Android porting and Android App Perfect combination of the newest processor and the latest Android version Support various multimedia formats to maximize availability Support user-focus App creation over wireless network Functions of ANDRO-1000 Provide a de
Renewable Energy Lab Equipment PCTK-100 / SEGT-1000 / WEGT-1000 (B) / WEGT-1000 (H) Wind Energy Generation Training System (Hand Type) User can learn the knowledge of principles and development system about Solar Power and Wind Power. Control Practice is possible by separately deviding each Module units. Whole system is configured to control in real-time. This is the training system which helps to breed up the human resources for the Renewable Energy Industry.
Power Conversion Training Kit Model: PCTK-100 PCTK-100 Features 1. The power conversion module is designed as an experiment and practice system for electronics and is suitable for students beginning with DC-DC Converter. 2. Circuit operation can be understood through manufacturing practice for each module. 3. It is possible to conduct experiment and practice to check change in output voltage of BUCK BOOST and CUK Modules by adjusting PWM Gen output DUTY cycle. 4.
Solar Energy Generation Trainer Model: SEGT-1000 [ Patent Applied No, 10-2010-0134493 ] SEGT-1000 Features 1. Helps users understand solar energy generating system by combining light source, charging controllers, converter, inverter, etc as a module. 2. Provides customized power generation system designing practices for manufacturing commercial products or practical training. 3. Every module is controlled through computer and has test pins for users to measure characteristics of each circuit. 4.
Wind Energy Generation Training System Model: WEGT-1000 Blade Type WEGT-1000 (Blade Type) features 1. Designed to allow indoor experiments for the principle of wind power generation 2. The system is composed of blower, blade, load module, wind speed meter, DC/AC inverter, battery and quick charger 3. For the purpose of safety, load and inverter modules are contained in a steel enclosure 4. Blade support frame is provided to endure the wind pressure when wind is applied to the blade by the blower. 5.
Wind Energy Generation Training System Model: WEGT-1000 Hand Type WEGT-1000 (Hand Type) functions WEGT-1000 (Hand Type) features 1. Measuring generator’ s 3-phase output energy 2. Measuring generator rotation vs. hand force 3. Power conversion using converter, inverter and load 4. Magnitude of energy generation vs. load 5. Power conversion circuit manufacturing practice Contents of WEGT-1000 (Hand Type) Textbook 1. Introduction to wind power generation 2.
A group of Basic Electronics Trainer ECTK-100 / BECK-1000 / DCTK-1000 Digital Communication Trainer DCTK-1000 Basic Electronic Circuit Training Kit Electronic Component Training Kit BECK-1000 ECTK-100 72 A L e a d e r Man & Tel. Co.
A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n Electronic Component Training Kit Model: ECTK-100 ECTK-100 helps users learn basic theories of electronic components and how to apply them to electric circuits through practical trainings. For the practices, ECTK-100 provides 36-type sample modules and 27-type PCBs for manufacturing practices. ECTK-100 is composed of 3 parts, and each part handles passive electronic components, active electronic components and sensors.
Electronic Component Training Kit ECTK-100 ECTK-100 Features ECTK-100 Training contents Chapter 1 Introduction Chapter 2 Trend and and forecast of electronic component industry Chapter 3 Basics of Resistor Chapter 4 Capacity characteristics of resistor Chapter 5 Applications of Resistor Chapter 6 Basics of Capacitor Chapter 7 Applications of Capacitor Chapter 8 Basics of Inductor Chapter 9 Applications of Inductor Chapter 10 Battery Chapter 11 Connector Chapter 12 Switch Chapter 13 Relay Chapter 14 Solar
A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n Basic electronic circuit training kit Model: BECK-1000 BECK-1000 Functions 1) Comprehensive training on basic electronic circuit modules 2) Measuring practice using Electronic Circuits and Power Supply Module. 3) Suitable for prerequisite course who major electronic engineering. 4) Improve the student techniques in handling the electronic circuits.
BECK-1000 Application practice by each of other module connection 1) RC Oscillator or Triangle-wave Oscillator + Differentiator + RC Oscillator Differentiator Triangle-wave Oscillator 2) RC Oscillator + Integrator + Differentiator + RC Oscillator Integrator + Differentiator 3) LC Oscillator + (BJT Amplifier + FET Amplifier for CD1 + FET Amplifier for CS2 BJT Amplifier + FET Amplifier for CD1 LC Oscillator FET Amplifier for CS2 BECK-1000 Training contents 1) Diode Characteristics 2) Voltage r
A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n Digital Communication Training Kit Model: DCTK-1000 DCTK-1000 Feature 1. Easy waveform observation by synchronization between informational signal and carrier required for communication experiments. 2. Easy to understand the mechanism of communication through step by step signal measurement. 3. Minimized wiring facilitates the signal measurement. 4.
DCTK-1000 Contents DCTK-1000 Components 1) Carrying bag (casing) 2) Module (1) Singal Generator (2) Line Code Encoder / Decoder (3) PAM Modulation and Demodulation (4) PTM(PPM,PWM) Modulation and Demodulation (5) PCM Modulation and Demodulation (6) DM Modulation and Demodulation (7) ADM Modulation and Demodulation (8) ASK Modulation and Demodulation (9) FSK Modulation and Demodulation (10) PSK Modulation and Demodulation (11) QPSK Modulation and Demodulation (12) QAM Modulation and Demodulation (13) PLL 3)
A group of PLC Trainer PLC-1000 / FATS-5000 Factory Automation Training System FATS-5000 PLC Trainer PLC-1000 A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n www.manntel.
A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n PLC Training System Model: PLC-1000 Features of PLC-1000 1. Basic PLC trainer for electric and electronic students 2. Basic PLC training and application based on wiring as needed 3. Separate PLC application modules 4. Practice of temperature control, traffic signal control, level control, conveyer control and parking control 5. Application practice using HMI 6.
A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n Factory Automation Training System Model: FATS-5000 This is PLC training system having many types of portable baseboards. This system enables various application practices, which can be applied to factory automation system, by free re-deployment and by automatic detection of baseboards & their locations. This is the differentiation from existing fixed-action pattern factory automation training system. 81 www.manntel.
Factory Automation Training System FATS-5000 FATS-5000 Features Contents of FATS-5000 Textbook Part 1. PLC overview Chapter 1 Overview Chapter 2 Applications Part 2. Basic Theory for PLC Applications Chapter 3 Work Environment Chapter 4 Creating a Project Chapter 5 Basic Circuit, Closed Circuit, Self-Holding Circuit, Interlock Circuit Part 3. Learning PLC through Projects Chapter 6 A-Project Chapter 7 B-Project Chapter 8 C-Project Part 4.
A group of Robot Training System MRT-1000 / RMR-1000 Embedded Application Trainer Mobile Robot Trainer RMR-1000 MRT-1000 A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n www.manntel.
A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n Moving Robot Trainer Model: MRT-1000 Features of MRT-1000 Composed of motor drives, which are key components of robot, and various sensor modules for collecting data USB communication cable with a high compatibility. The main board is so configured as to control 15 modules.
A L e a d e r i n n e w T e c h n o l o g y & E d u c a t i o n Remote motion-capture robot Model: RMR-1000 RMR-1000 Features 1. RMR-1000 provides a detailed robot control techniques through the offered control environment in which the robot moves in a same way with the detected user's movement. 2. User’ s arm joint motion is recognized to control robot arms.
RMR-1000 System configuration 1) Google 2) Suit 3) Robot car RMR-1000 Block Diagram RMR-1000 Specifications Div robot item Robot arm suit Camera module servomotor character LCD Ultrasonic sensor module DC motor Infrared sensor module wheel car suit Triaxial acceleration sensor module Gyro sensor modeule goggles common MCU Zigbee module Lithium polymer battery 86 Man & Tel. Co., Ltd, specification Dynamic cell (RX-64/RX-28) Operation voltage 12V~18.
H i g h T e c h n o l o g y Business History 2000. Aug Sept Nov Dec 2001. July Dec 2002. Mar July Nov Dec 2003. Jan April May July Aug 2004. Mar May Aug Sept Dec 2005. Aug Aug Sept 2006. Jan Mar May July Oct Nov 2007. Mar Aug Oct Nov 2008. May June July Dec 2009. Feb April July Aug Sept Oct 2010. July Aug Sep Nov 2011 Mar Mar Mar April 2012 Feb Mar April CE-WATS-2002 CE-MW-2000 CE-CMT-5000 CE- ERT-5000 Man & Tel Co.,Ltd established.
Office: Man & Tel Co., Ltd. 1053-1 Wonpyeong-dong, Gumi-si, Gyengsangbuk-do, 730-925, Korea TEL: +82-54-444-2377 / +82-54-444-2378 FAX: +82-54-444-2379 E-mail: master@manntel.com www.manntel.