8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 1 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 2 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796 Section Welcome… to your BT Baby Monitor 100 TM • Digital sound quality with high definition sound (Hi-dS ) lets you hear your baby breathe, gurgle, snuffle or cry with complete clarity. • Wireless range of up to 300m outdoors and up to 50m indoors (in ideal conditions) - giving you the freedom to move around with clear reception and no interference from other baby monitors.
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 3 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796 Section This User Guide provides you with all the information you need to get the most from your BT Baby Monitor 100. Please read this guide carefully and keep it for future reference. Need help? If you have any problems setting up or using your BT Baby Monitor 100 (or would like additional or replacement batteries), call the BT Baby Monitor Helpline 0808 100 6554*.
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 4 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796 4 In this guide Setting up Parent unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Baby unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Check the connection . . . . . . . . . . . . . . . . . . 7 Getting to know your Baby Monitor Parent unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Parent unit charger . . . . . . . . . . . . . . . . . . . .
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 5 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796 Setting up Parent unit 1. Plug the mains power cable into the socket marked on the back of the Parent unit charger. Connect the other end to the mains power and switch on. 2. Remove the battery compartment cover and insert the 2 x AA rechargeable batteries into the battery compartment on the Parent unit and replace the battery compartment cover as shown.
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 6 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796 6 Setting up Running rechargeable batteries right down at least once a week will help them last as long as possible. The charge capacity of rechargeable batteries will reduce with time as they wear out, so reducing the performance time of the Parent unit. Eventually they will need to be replaced. New batteries can be obtained from the BT Baby Monitor Helpline 0808 100 6554*.
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 7 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796 Setting up 3. Replace the battery cover, turning the battery lock into the vertical position again to lock it. Check the connection When both Units are switched on, the green link lights on both Units will come on. If the link between the Units is broken at any time, the link lights will turn red and flash slowly.
796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 8 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796 8 Getting to know your Baby Monitor Parent unit From the Parent unit you can listen to your baby and operate the Baby unit by remote control. Talk (on side of unit) Press to talk to your baby. Lullaby LEDs Green on – When the selected lullably is being played. Up Increase speaker volume. Increase sensitivity when reviewing the setting. Change lullaby when playing.
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 9 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796 Getting to know your Baby Monitor Parent unit charger Front Charging light Indicates Parent unit is charging. s. Back Power socket For connection to mains power.
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 10 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796 10 Getting to know your Baby Monitor Baby unit Page Press to page the Parent unit – useful for finding when it is misplaced. Brightness Press to adjust the nightlight brightness (once nightlight is switched on). There are three levels. Nightlight Press to switch nightlight on or off. Up/Register Increase speaker volume. Use to enter registration mode.
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 11 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796 Getting to know your Baby Monitor Back of Baby unit Power socket For connection to mains power. Underside Battery lock Child tamper proof lock for the battery compartment.
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 12 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796 12 Using your BT Baby Monitor 100 Helpline If you have any problems using your BT Baby Monitor 100, call 0808 100 6554*. Switching on/off Switch on the Parent unit 1. Press and hold . The Link LED on the far left will illuminate. Keep pressing the button until the 3 LEDs to the far right illuminate as well.
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 13 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796 Using your BT Baby Monitor 100 Adjust speaker volume There are 5 volume levels (and off) on the Parent unit. The LEDs indicate the level. The first 4 levels are shown as green and the 5th level as red. Red is the highest level. 1. Press or . Changing the volume setting on the Baby unit affects the volume when you use the Talk Back feature and when playing a lullaby.
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 14 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796 14 Using your BT Baby Monitor 100 Paging You can use the button on the Baby unit to find the Parent unit. This will also reset the speaker volume level, in case it has been switched off. 1. Press on the Baby unit. If the Parent unit volume was set to off, this will automatically reset the volume to the default volume. The paging alert will sound. 2.
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 15 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796 Using your BT Baby Monitor 100 Sensitivity You can change the level of sensitivity on your BT Baby Monitor 100 to suit your baby. For example, if your baby is a particularly quiet sleeper, you can increase the sensitivity levels so that you are sure to hear if baby disturbs or becomes uncomfortable.
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 16 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796 16 Using your BT Baby Monitor 100 Sound level visual indicator The noise level from baby’s room is indicated by the LEDS on the Parent unit. So even if the loudspeaker is turned down, you can be alerted visually. There are 7 LED noise indicators - 4 green and 3 red covering a range of noise levels from 0dB up to 40dB.
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 17 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796 Using your BT Baby Monitor 100 Lullaby The Baby unit plays lullabies to gently soothe your baby back to sleep. Each lullaby is played repeatedly for 15 minutes. Select one of the three melodies or select Play All for a medley of all 3 lullabies for 15 minutes. The Lullaby LEDs indicate which lullaby is playing or if all 3 are being played.
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 18 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796 18 Help Helpline If you have any problems using your BT Baby Monitor 100, call 0808 100 6554*. Power lights do not come on • If using the mains power adapters make sure they are plugged in and switched on. • If using batteries, check they are correctly installed and not drained. Link light does not come on • Check that both the Baby and Parent units are switched on.
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 19 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796 Help Link light is red • The link between your Units is broken. You will also hear an alert to let you know there is no communication between the Units. If this happens, check that the mains power (or batteries) is correctly connected and that the Units are within range of one another. Parent unit remains silent or very quiet • The sensitivity setting may be too low, see page 15.
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 20 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796 20 General information Cleaning Within the 12 month guarantee period Both Units have splash resistant grilles and casing. To clean, wipe with a damp cloth. If you experience difficulty using the product, prior to returning your product, please read the Help section beginning on page 18, or contact the BT Baby Monitor Helpline for assistance on 0808 100 6554*.
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 21 BT Baby Monitor 100 VTECH – Issue 2 – 27.05.08 – 8796 General information Product disposal instructions for residential users When you have no further use for it, please remove any batteries and dispose of them and the product as per your local authority’s recycling processes. For more information please contact your local authority or the retailer where the product was purchased.
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 22
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 13:02 Page 23
8796 Baby Monitor 100 UG [Vtech 2] 27/5/08 Offices worldwide The services described in this publication are subject to availability and may be modified from time to time. Services and equipment are provided subject to British Telecommunications plc’s respective standard conditions of contract. Nothing in this publication forms any part of any contract. © British Telecommunications plc 2008. Registered Office: 81 Newgate Street, London EC1A 7AJ. Registered in England No. 1800000.