User's Manual

1. Menus when using PC Mode
1) PC ADJUST
Brightness : Adjust to brighten or darken the picture.
Contrast : The contrast control determines the white level of the picture.
H-Position : Move the entire screen to the left or right.
V-Position : Move the entire screen to the below or upper.
PHASE : Fine tuning of the screen even though it is not easily distinguishable with naked eyes.
CLOCK : Adjust the horizontal-size(size of horizontal screen)of the entire screen.
Auto White Balance : Select this menu to use automatic color balance function.
Factory Default : Screen parameters are replaced with the factory default values.
2) OSD ADJUST
Language : OSD language and appearance can be changed.
OSD H-Position : You can change the horizontal position where the OSD menu appears on your
monitor
OSD V-Position : You can change the vertical position where the OSD menu appears on your
monitor
OSD Off Time : The OSD will automatically turn off if no adjustments are made for a certain time
period.
OSD Transparency : Changes the transparent(or opaque) status of the background of the OSD.
2. Menus when using TV Mode
1) PICTURE
Brightness : Adjust to brighten or darken the picture.
Contrast : The contrast control determines the white level of the picture.
Sharpness : Adjust the sharpen or soften the picture.
Color : Adjust to increase or decrease color intensity..
Tint : Change the tone of the color.
Smart Picture Control : Changes the picture setting that is defined for [NORMAL], [ DYNAMIC],
[ CINEMA] or [ USER] each.