This equipment has been designed for the normal use. It is certified to comply with Electron Wave Suitable Registration. The user this equipment in everywhere including residential areas. 190M LCD Monitor User Manual Notice This equipment is one of first class quality. The LCD panel is composed of about 4 Million pixels and may have some faulty pixels. LCD panels with a maximum of 10 faulty pixels are classified as products of good quality. This standard is accepted by other manufacturers of LCD panels.
190M LCD Monitor IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS Always be careful when using your LCD Monitor. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. Do not open the monitor. Contact your dealer if the monitor is not operating properly. Do not place the monitor in direct sunlight or close to any heat source. - Product malfunction or fire hazard may occur. Do not drop metal objects like coins or hairpins into the monitor.
IMPORTANT SAFEGUARDS In case of any smoke or abnormal noise, immediately stop use of product and pull the power cord from the wall outlet. Then call your local dealer or service representative for assistance. -Any subsequent use may result in fire or electric shock. Install the monitor at the specified position from the wall to be well ventilated. - A rise in temperature of monitor may cause fire. Install the monitor in stable place. - An unstable monitor may crash or fall.
IMPORTANT SAFEGUARDS Do not press hard with your finger or scratch with sharp object on the surface of the LCD. -Any damage on the surface of the LCD may cause functional failure. When you clean the monitor and the surface of LCD, be sure to pull the plug from wall outlet. Use soft cloth instead of using damp duster. Do not use any chemicals such as industrial polisher, abrasive solution, wax, benzene, alcohol, or clearing detergents.
190M LCD Monitor ACCESSORIES
ACCESSORIES Please make sure the following accessories are provided with your LCD Monitor. If any items are missing, contact your dealer.
190M LCD Monitor PREPARATION
PREPARATION Connection 1. Power Connection : Connect the [POWER Cable] to the power terminal on the back of the monitor. 2. Connection of PC : Connect the signal cable(D-SUB cable) to the monitor output socket of the computer and the other end to D-SUB on the back of the monitor. 3. AUDIO IN : Connect an audio cable to AUDIO IN on the back of the Monitor and the other end to AUDIO OUT terminal of the sound card on your computer.
PREPARATION Mounting Device [Separation] & [Union] 1. Separation 1) Turn off your monitor and unplug its power cord. 2) Lay the monitor face-down ward on a flat surface with a cushion beneath it to protect the screen. 3) Remove the screws( A ) and then remove the Mounting Device from the monitor. 4) Remove the screws( B ) and then remove the Mounting Device from the monitor. 2. Union 1) Align the Mounting Device with the holes( B ) in the Rear Cover and secure it with the screws.
190M LCD Monitor OPERATION AND CONTROL
OPERATION & CONTROL LCD Monitor Control Overview 1) Controls 1. LCD Panel 2. Menu Button : Use this button to open the OSD and activate a highlighted menu items. 3. Select Button : Use this button to activate a highlighted menu item. Allows the monitor to self-adjust to the incoming video signal. 4. Adjust Buttons : These buttons allow you to highlight and adjust items in the OSD. Increases or decreases the level of speaker volume. 5. Power Button : Turns ON/OFF the monitor. 6.
OPERATION & CONTROL 2) Terminals 1. Power In Terminal : Connect the [POWER Cable] to the power terminal on the back of the monitor. 2. D-SUB Terminal : Connect the monitor D-SUB connector and the PC using the D-SUB signal cable. 3. AUDIO IN Terminal : Connect the audio output of the PC. 4. AUDIO OUT Terminal : Connect the stereo speaker system to Audio output. 5. VESA HOLE for fixing on the wall. : Supports VESA mounting standard for use with various VESA mounting devices.
190M LCD Monitor BASIC EXPLANATION
BASIC EXPLANATION The front part of panel of this model consists of following function buttons. Description for each of function button is shown below. Power Button Turns ON/OFF the monitor. Menu Button Use this button to open the OSD and activate a highlighted menu items. SELECT Button Use this button to activate a highlighted menu item. Allows the monitor to self-adjust to the incoming video signal. Adjust Buttons These buttons allow you to highlight and adjust items in the OSD.
190M LCD Monitor BASIC OPERATION
BASIC OPERATION Turning on POWER Press MAIN POWER.
BASIC OPERATION OSD Adjustment Set OSD value with the instructions described below.
BASIC OPERATION Frequently used function 1) Monitor Self-Adjust Self-Adjust to the incoming video signal. Press the "SELECT" Button. (SELECT -> YES -> Self-Adjust) 2) Adjust Speaker Volume Increases or decreases the level of speaker volume. 3) Reset Factory Default Screen parameters are replaced with the factory default values. 4) White Balance Select this menu to use automatic color balance function.
190M LCD Monitor DESCRIPTION AND DIRECTORIES OF ALL MENUS
DESCRIPTION & DIRECTORIES OF ALL MENUS OSD for Each Adjustment Items 1. DISPLAY ADJUST a. BRIGHTNESS : Adjust to brighten or darken the picture. b. CONTRAST : The contrast control determines the white level of the picture. c. PHASE : Fine tuning of the screen even though it is not easily distinguishable with naked eyes. d. CLOCK : Adjust the horizontal-size(size of horizontal screen)of the entire screen. e. H-POSITION : Move the entire screen to the left or right. f.
190M LCD Monitor VOCABULARY
VOCABULARY Dot pitch The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The distance between two dots of the same color is called the 'Dot Pitch'. Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal Frequency.
190M LCD Monitor TROUBLESHOOTING
TROUBLESHOOTING Before calling for repair services, make the following checks for possible remedies to the encountered symptoms. Problem Screen is black and power indicator is off Possible Remedies Ensure that the power cord is firmly connected and the Monitor is on. Screen is black and power indicator is Ensure that the signal cable is firmly connected to the PC. blinks. Ensure that the PC are turned on. Screen position and size is incorrect. Press the AUTO Button.
190M LCD Monitor SPECIFICATIONS
SPECIFICATIONS Product Specification MONITOR TYPE TFT LCD Flat Panel VIEWABLE SCREEN SIZE 19.0” (48.184Cm) RESOLUTION 1280 x 1024 (SXGA) DISPLAY COLOR(Max.) 16.7M colors PIXEL ARRANGMENT RGB Vertical stripe PIXEL PITCH 0.294mm(H) x 0.294mm(V) VIEWING ANGLES (H/V) 170 / 170 (Typ.) RESPONSE TIME (ms) 25ms (Typ.) CONTRAST RATIO 500:1 (Typ.) BRIGHTNESS (cd/m²) 250 (Typ.) OPERATING TEMPERATURE 0 (Min.), +50 (Max.) STORAGE TEMPERATURE -20 (Min.), +60 (Max.
SPECIFICATIONS Display Mode REFRESH HORIZONTAL PIXEL RATE FREQUENCY FREQUENCY 640 X 350 70 Hz 31.5 KHz 25.175 MH VESA Standard 640 X 400 70 Hz 31.5 KHz 25.175 MH VESA Standard 720 X 350 70 Hz 31.5 KHz 28.35 MHz VESA Standard 60 Hz 31.5 KHz 25.175 MH Industry Standard 72 Hz 37.9 KHz 31.500 MHz VESA Standard 75 Hz 37.5 KHz 31.500 MHz VESA Standard 56 Hz 35.1 KHz 36.600 MHz VESA Guidelines 60 Hz 37.9 KHz 40.000 MHz VESA Guidelines 72 Hz 48.1 KHz 50.