User's Manual

119
circumstances (i.e. normal, above normal or below normal). Click on delete to remove a selection
or click on tab again to allow the selection to stay.
Super Protocols
Super Protocols can be created when you require a standardized protocol for testing (i.e. Post
Offer of Employment Testing). They can also be used if you want to decrease the amount of time
required to select specific tests for a specific injuries. You can create a Super Protocol in the
same manner you would create a template.
Select a client and click Super Protocol from any testing page. Click New Test and then Edit the
protocol to include the tests applicable to your needs.
Select the applicable tests from the lists on the left-hand side of the page and Add them to the
Super Protocol. The order of testing can be changed by selecting one of the included tests and
using the Change Order arrows to move it up or down within the list. Once you have added all the
applicable tests and arranged them in the desired order finish the process by clicking Lock Super
Protocol. You will be prompted to enter and confirm a password to lock the Super Protocol.
To apply a Super Protocol, select a client then click Super Protocol from either the ODES main
menu or from a page where tests are selected. Click the Super Protocol you wish to use. The
tests for that protocol will automatically be added to your client once you have performed the first
test. Click Next Protocol to go to the next test in sequence.