User's Manual

16
The next step in the set up of the Computer Management Stand is the installation and mounting of all the
other equipment. As mentioned earlier the computer monitor rests on the top shelf, the printer and
computer speakers rests on the middle shelf, and the computer tower rests on the bottom shelf of the
front of the stand. The back of the stand and both sides of the stand also hold numerous pieces of
equipment.
The right side of the stand (when facing the front of the stand) holds the two FOCUS shelves as shown
below. The shelf with the elbow attachment is mounted below the shelf with the straight pin attachment.
The left side of the stand holds the Data Acquisition Box, the Inclinometer, the Goniometer, the Handgrip
Dynamometer, the Pinchgrip Dynamometer, the Algometer, the Universal Task Master (UTM), the
FOCUS load cell, and the Heart Rate Monitor. The first piece of equipment to be installed on the left side
of the stand is the Data Acquisition Box. The one narrow end of the Data Acquisition Box with the power
switch faces the ground.
Shelf 1
Shelf 2
Shelf 3
Shelf with straight pin attachment.
Shelf with elbow attachment.
Power
switch.