User's Manual

55
You should also note that the calibration tool for the Pinch Grip has a weight of 0.3 lbs. This weight must
be taken into consideration when calibrating the Pinch Grip.
Once the weight is steady, click OK to begin the calibration.
Once the device has been successfully calibrated, a window will appear requesting the name of the
individual who just completed the calibration. This can be done either manually or, if your name exists as
a supervising practitioner in the database, it will appear in the drop-down menu.
Algometer Calibration
Please ensure that the Algometer is plugged into PORT 6 on the Data Acquisition Box (unless you have
changed the device settings to Port 3. Refer to the algometer section for further details).