User's Manual

60
Click OK adjacent to the Load Cell Calibration instructions.
Each of the two ER accessory arms is calibrated separately.
Follow the instructions listed under “Bottom Shelf Height” or “Lower Accessory Arm” to calibrate the lower
accessory arm, then click OK.
Once the device has been successfully calibrated, a screen will come up requesting the name of the
individual who just completed the calibration.
Universal Task Master Calibration
Please ensure the Universal Task Master is plugged into TM on the Data Acquisition Box.
From the ODES main menu on the top menu bar, go to the Calibration | Calibrate Task Master.