User's Manual

65
Whichever method is used, the same page will appear:
From here, select the tool to be verified (in this case the Hand Grip) and you will be brought to the
verification page. This page allows you to select the equipment being verified, shows the most recent
date of passed verification and allows you to conduct the verification procedure.
The verification page on your computer will now ask you to enter the amount of weight you are using for
verification. A different weight should be used and entered into the blank field on the page. Make sure to
It is important to note that when verifying, a weight different than what was
utilized for calibration be selected. For example, if a 15 lb weight was used to
calibrate, use 10 lbs to verify.