User's Manual

83
Restore Database
To restore a previously backed up database go to File ~ Restore Database. This feature allows
you to restore a database that has been backed up to a floppy disk or hard drive. It will replace
databases of the same name, however, so it is important to know what you are restoring before
you overwrite any information. After you restore a database, you must use the Database
Location field to find the newly restored database. Impairment ratings can be included in this
process. Passwords are only required if you indicated so at the time of data backup.
Log Off and Exit
The Log Off option is to be used if you are going to be using ODES on and off throughout the
day. By logging off rather than exiting, the speed of ODES will be enhanced. To exit the software
either click on exit from this menu, click on Exit from the main screen of ODES or click on the “x”
at the top right hand corner of the screen.
Calibration Menu
For calibration of each tool, please see the Getting Started section of the manual.
Calibrate Equipment
To calibrate your equipment, go to Calibration ~ Calibrate Equipment (If there is more than one
type of BTE system used with this database, go to Calibration ~ Calibrate FOCUS). Calibration
should take place once every week.