User's Manual

84
For Evaluator and CIRES systems, auto calibration can be set up. A floppy disk will be provided
with the system for this purpose. Follow the instructions on the disk to install this feature.
Depending on how the system is utilized, auto calibration will last up to 3 months. Following this
time period, the factory settings are no longer accurate and manual calibration should be done.
To auto calibrate, click Auto, then click the tool you wish to calibrate and follow the instructions.
When auto calibration is performed it will include the voltage reading based on the tools you
selected. Once you have completed calibration, a window will prompt you to enter your name. If
your name has been entered under Administration ~ Practitioner Information, you will be able to
select it from the drop down menu.
For all other systems, manual calibration is always used. Click Manual, select the tool you would
like to calibrate, and follow the instructions.
It is recommended you calibrate your system once a week.
A reminder to calibrate may be set through Administration
~
Environment
Settings.