User's Manual

85
Verifying Calibration
To verify your calibrations, go to Calibration ~ Verify Calibrations (If there is more than one type
of BTE system used with this database go to Calibration ~ Verify FOCUS). Verification should
take place at the beginning of each day in order to make sure that the results are accurate. Click
the tool you wish to verify and follow the instructions. Once you have completed verification, a
window will prompt you to enter your name. If your name has been entered under Administration
~ Practitioner Information, you will be able to select it from the drop down menu.
Calibration Reports
To print or view the calibration and verification reports go to Calibration ~ Calibration Reports.
Printed reports include the following information:
Name of person who performed calibration/verification
Date when the calibration/verification occurred
Actual weight, measured weight and deviation from accuracy of each device calibrated
You may specify the print range for this data.