User's Manual

268
F.R.O.M. Stooping – Occ
PREREQUISITES
The test subject is advised that he/she may return to an erect posture subsequent to the completion of a
test cycle.
PROCESS
The test subject is instructed to move the five rows of pegs from Panel 2 - Row 2 - Zone C through Panel
2 - Row 1 - Zone B to the corresponding row of holes in Panel 3. The transfer process requires the test
subject to take the peg out of the hole with the left hand, transfer it to the right hand while the peg is out of
the hole, and then place the peg into the corresponding hole with the right hand. The test subject
commences with the highest level row and then proceeds in order to the lowest level row. Once the
fifteen pegs have been moved, the process is completed in reverse order until all fifteen pegs are
restored to their original position. This constitutes the completion of one cycle. The test is concluded
when a total of five cycles are completed.
F.R.O.M. Stooping – Freq
PREREQUISITES
The test subject is advised that he/she may return to an erect posture subsequent to the completion of a
test cycle. The test subject is also advised that a ten second rest period is provided after the completion
of each five cycles until the test is completed.
PROCESS
The test subject is instructed to move the five rows of pegs from Panel 2 - Row 2 - Zone C through Panel
2 - Row 1 - Zone B to the corresponding row of holes in Panel 3. The transfer process requires the test
subject to take the peg out of the hole with the left hand, transfer it to the right hand while the peg is out of
the hole, and then place the peg into the corresponding hole with the right hand. The test subject
commences with the highest level row and then proceeds in order to the lowest level row. Once the
fifteen pegs have been moved, the process is completed in reverse order until all fifteen pegs are
restored to their original position. This constitutes the completion of one cycle. The test is concluded
when a total of twenty cycles are completed.