User's Manual

272
F.R.O.M. Kneeling – Occ
PREREQUISITES
The test subject is allowed the opportunity to wear knee pads if desired. The test subject is also advised
that he/she must remain in the kneeling position during the course of the test until it is completed.
PROCESS
The test subject is instructed to move the five rows of pegs from Panel 1 - Zone C to the corresponding
row of holes in Panel 2 - Zone C. The transfer process requires the test subject to take the peg out of the
hole with the left hand, transfer it to the right hand while the peg is out of the hole, and then place the peg
into the corresponding hole with the right hand. The test subject commences with the highest level row
and then proceeds in order to the lowest level row. Once the fifteen pegs have been moved, the process
is completed in reverse order until all fifteen pegs are restored to their original position. This constitutes
the completion of one cycle. The test is concluded when a total of five cycles are completed.
F.R.O.M. Kneeling – Freq
PREREQUISITES
The test subject is allowed the opportunity to wear kneepads if desired. The test subject is also advised
that he/she must remain in the kneeling position during the course of the test for the completion of five
cycles before a ten-second rest is allowed out of the kneeling position. The rest period is allowed out of
the kneeling position after every five cycles until the test is completed.
PROCESS
The test subject is instructed to move the five rows of pegs from Panel 1 - Zone C to the corresponding
row of holes in Panel 2 - Zone C. The transfer process requires the test subject to take the peg out of the
hole with the left hand, transfer it to the right hand while the peg is out of the hole, and then place the peg
into the corresponding hole with the right hand. The test subject commences with the highest level row
and then proceeds in order to the lowest level row. Once the fifteen pegs have been moved, the process
is completed in reverse order until all fifteen pegs are restored to their original position. This constitutes
the completion of one cycle. The test is concluded when a total of twenty cycles are completed.