User's Manual
278
BTE Digital Radio Frequency Heart Rate Monitor 
The BTE Digital Radio Frequency Heart Rate Monitor is fully integrated with the Data Acquisition Box. 
The use of the Heart Rate Monitor provides the ability to monitor a client’s heart rate. Unlike other heart 
rate monitors, the BTE Heart Rate Monitor allows for constant monitoring during the work simulation tests 
while remaining fully integrated with the computer. The range of the BTE Heart Rate Monitor has been 
tested to be accurate for up to 30-50 feet. 
Radio frequency allows for non-interruption of signal, therefore: 
Clothing does not interfere 
Radio signal does not require line-of-sight 
Movement in front of the receiver does not block the signal 
This equipment contains an RF module, which has been previously tested and found to 
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against harmful interference in 
a residential installation. This equipment generates, uses and can radiate radio 
frequency energy and if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to try to correct the interference by one 
or more of the following measures: 
Reorient or relocate the receiving antenna. 
Increase the separation between the equipment and receiver. 
Connect the equipment to an outlet on a circuit different from that to which the receiver is 
connected. 
Consult the dealer or an experienced radio/TV technician for help. 
This equipment has been certified to comply with the limits for a Class B computing 
device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, 
shielded cables must be used with this equipment. Operation with non-approved 
equipment or unshielded cables is likely to result in interference to radio and TV 
reception. The user is cautioned that changes and modifications made to the equipment 
without the approval of manufacturer could void the users authority to operate this 
equipment. 
ATTENTION
The Hanoun Digital Radio Frequency Heart Rate Monitor is a fitness-monitoring device 
solely intended to monitor a client’s heart rate during physical testing. It is not a medical 
device and should not be used in any way to diagnose a client’s health or to prescribe 
treatment.










