User's Manual

293
If the wrong tool is selected, create a new test using the same values (just a different name)
If the correct tool is selected, ensure that your DAC box is set up successfully.
If you still cannot perform the test, contact our customer service department at [phone] X2.
Evaluator/CIRES Systems:
Ensure that your device settings are both set to PORT 6 in Administration _ Environmental Settings. This
will ensure that the Algometer will work in both the strength testing screens and in the superficial
tenderness testing screens.
To check device settings, go to Administration _ Environment Settings from the ODES main menu. The
device settings are listed in the upper right-hand corner of the screen.
The ‘F’ and ‘P’ values should both say ‘6’. If they don’t (as shown above), double click on the word
Device Settings. Device Settings should now be in red.