User's Manual

194
Once a test has been added to a client, and Perform Test has been clicked in the bottom right hand
corner of the page (or the test itself has been double-clicked), the test page will appear. Below is an
example of what the test page looks like for the standardized Pinch Grip.
This is a list of all
the protocols found
in the Work
Simulation menu.
This is a short cut to return to any of the test
menu screens in ODES¥. The test menu
that is in use will appear yellow.
Select this
button to
return to the
ODES™ main
menu.
All of the tests
that are
assigned to the
client will appear
in this area.
Double click on the test
or highlight the test and
click here to assign it to
the client.
In order to edit, create
or remove tests,
highlight the work
simulation protocol
then click on the
appropriate button.
Located in this area
are the standardized
instructions for the
Pinch Grip tests.
Click this
button to
start the
Key Pinch
Test.
Click Start HR to capture the client’s heart rate during the
test. You also have the option of entering the heart rate
manually by double-clicking on the heart graphic
Click this button
to return to the
Strength menu.
Protocol Hibernation
puts unused protocols in
storage without
removing data.