User's Manual

231

Grip the handle, and pull it outward (further to the right), while maintaining a firm grip on it. This will unlock

the accessory housing mechanism, by creating a space in the slot at the end of the Multiplanar Accessory

Housing Joint. While holding the handle in this position, gently twist it in any direction. This will keep the

handle in an unlocked position while you insert an accessory.

Select the accessory to be attached. On the end of the accessory there is a flattened side and a slightly

rounded side.

Insert the accessory into the opening at the top of the Multiplanar Accessory Housing Joint, with the flat

side of the accessory facing to the right (the side with the handle).

Grip the handle on the right-hand side of the Multiplanar Accessory Housing Joint and turn until a clicking

sound is heard. This indicates that the handle has locked into the accessory. Now turn the handle in a

clockwise direction, until it firmly secures the accessory into the Multiplanar Accessory Housing Joint

mechanism.

Grip the accessory and shake it back and forth. The accessory should be firmly inserted, and not be

loose in any way.

Removing an accessory from the Multiplanar Accessory Housing Joint

Locate the top handle on the right side of the Multiplanar Accessory Housing Joint.

Give the handle an approximately ¼ turn in a counterclockwise direction.

Grip the handle, and pull it outward (further to the right), while maintaining a firm grip on it, then turn it

gently in any direction. This will unlock the accessory from the housing mechanism as well as maintain

the space in the slot at the end of the Multiplanar Accessory Housing Joint.

Grip and pull the accessory until it separates from the Multiplanar Accessory Housing Joint mechanism.

ER Shelves

The ER system comes with two shelves to be used during a variety of functional tests. Each of the two

shelves has a different attachment mechanism.

One of the shelves has an end that is similar to the end of all other accessories. It is therefore referred to

as the Accessory Shelf. This shelf is used as an accessory during functional tests and attaches directly

Prior to performing any testing on clients, ensure that the Multiplanar Accessory Housing Joint

is securely attached to the upper or lower accessory arm, and that any attachment used is

firml

secured to the accessor

housin

mechanism.