User's Manual Part 1

page

section 02

40040005 rev. 000

Add a new template by clicking New.

Edit an existing template by clicking Edit and then selecting the template.

Remove an existing template by clicking Remove and then selecting the template.

H. PROTOCOL HIBERNATION

This screen allows you to place protocols, which may not be used often, in hibernation

as well as remove protocols, which may be needed, from hibernation. Moving protocols in

and out of hibernation does not delete the data or testing information. Note that protocol

hibernation can also be accessed through the protocol pages (Figure 2-18).

Hibernate a test by highlighting the test on the left hand side of the screen and then click-

ing Put into Hibernation. The test should now appear on the right screen and not the left

one.

Bring a protocol out of hibernation by highlighting the test from the right hand side of the

screen and then clicking Awaken From Hibernation. The test should now appear on the

left screen and not the right one.

I. REMOVE CURRENT CASE

This screen allows you to delete the client case that has been selected from within the home

screen. Note that once a case has been deleted, it cannot be retrieved.

Step 1. Remove the current client case by clicking Remove Current Case.

Figure 2-17. Superficial Tenderness Templates

Figure 2-18. Protocol Hibernation