User's Manual Part 1

section 06
page
31
40040005 rev. 000
the halo is set (i.e. 0 degrees, 25 degrees, and 45 degrees).
Step 1. Assign a test to a client by highlighting the test in the left box and clicking Add
to Client or by double clicking on the test in the left box.
Step 2. Once a test has been assigned to a client, highlight the test name in the right
box and click Perform Test to bring up the testing screen (Figure 6-78).
The initial Cervical Strength protocol screens contain the following features:
• Name of the test
• Start Test icon, which changes to Stop Test after the test has begun
• Analysis icon to extensively analyze the data of a completed test
• New icon to begin a new set of test results
• Delete icon to delete the selected test’s results
• Close icon to return to the protocol screen
• Next Protocol icon to move on to the next protocol
• Flexion icon, which switches to the Flexion test screen
• Extension icon, which switches to the Extension test screen
• Lateral icon, which switches to the Lateral test screen
• Protraction icon, which switches to the Protraction screen
• Retraction icon, which switches to the Retraction screen
• Graphs and tables to illustrate the test results
• Instructions on how to perform the tests
• Threshold icon, which allows a threshold force to be set
2. UTILIZING THE STRENGTH FLEXION TEST
The Strength Flexion test measures the patient’s strength with respect to the flexor
muscle group.
Step 1. Select the Flexion icon. The Flexion Testing screen will appear (Figure 6-79).
Note that the screen shown in the figure may differ from that on the computer.
Figure 6-78. Cervical Strength Main Screen