User's Manual Part 1

page

section 06

40040005 rev. 000

coefficient of variation (COV), and the percent of normal. The pain ratings determined

by the patient will also appear in the pain scale text field.

You may retest a trial by clicking on the R icon to the left or right of the trial table, de-

pending on which trial you would like to redo. However, once a test has been closed, the

trials can not be retested.

7. CREATING CUSTOM CERVICAL INTEGRATION PROTOCOLS

Access the pre-programmed Strength protocols by clicking the Strength Tests icon on

the Home Screen.

This will bring you to the Strength Protocols main page, where you can edit and create

tests.

Create a new test by clicking on New Test and then clicking Cervical Integration (Fig-

ure 6-87).

The following can be created on Custom Cervical Integration Protocols:

A. Cervical Protocol Name - Type in the name of the test

B. Maximum Trial Duration - Set the maximum amount of time (seconds) for the trial

duration

C. Rest Period Between Trials - Set the amount of time (seconds) to rest between trials

D. Rest Period Between Sides - Set the amount of time (seconds) to rest between

switching sides

E. Fixed Initial Rotation Angle (deg) - Set the initial angle (degrees) for a rotation test

F. Test Description - Type in any description that should be included on the test

G. Insert Password - Choose whether a password is required to edit the test – if this op-

tion is selected, any user will be prompted for the password whenever he or she tries to

edit the test.

H. Body Region - Select which body region is to be evaluated

I. Fixed Initial Flexion/Extension Angle (deg) - Set the initial (degrees) for a flexion or

extension test

J. Flexion/Extension Threshold (lbs) - Set the amount of force (lbs) required for a flex-

Figure 6-87. Custom Cervical Integration Protocol