User Manual

26
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
!
GMRS-50V2!
!
!
!
Chapter!4.!–!Programm i ng!S ca nning !
Channels!
The BTECH GMRS-50V2 features 226 additional (256 total) memory channels that each can hold:
Receive frequencies, group signaling information, bandwidth, and a seven-character alphanumeric
identifier or channel name
GMRS Channels (001-030) are programmed as a default from the factory and; also, after a full reset.
Settings such as the calling tone can be edited on GMRS channels. These channels can also be removed
if desired.
Channels 000-255 can be added or deleted via computer or manual programming.
Manual%programm ing%
To create a new scanning channel, start by switching your radio to Frequency (VFO) mode (Press and
Hold [MENU] button on the microphone or use the V/M button on the front panel).