User Manual

VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP

GMRS-50V2!

Remote Kill

First set the DTMF Remote Kill Code and Master Control ID in Software: When your radio receives the

DTMF Remote Kill Tone Sequence (Set by software, also requires Menu 18 set to accept DTMF signaling)

it will command the radio to disable transmitting and receiving. The Master ID station must first identify

and send the PTTID (set in software as “Master ID”) – once the Master Station identifies itself, the radio

is set to receive command tones. When the Monitor Remote Kill tones are received, the radio will no

longer be able to transmit or receive. Both the master ID station and remote kill tones must be set up in

software.

Remote Revive

First set the DTMF Remote Revive Code and Master Control ID in Software: When your radio receives

the DTMF Remote Revive Tone Sequence (Set by software, also requires Menu 18 set to accept DTMF

signaling) it will reactivate the radio after it has been remotely stunned or killed. The Master ID station

must first identify and send the PTTID (set in software as “Master ID”) – once the Master Station

identifies itself, the radio is set to receive command tones. When the Monitor Remote Kill tone is

received, the radio will return to normal operation from a stun/kill command. Both the master ID station

and remote revive tones must be set up in software.