User Manual

38
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
!
GMRS-50V2!
!
!
!
To resume scanning you must press and hold the key again.
%
SKIP%Scanning%Channels%%
You can configure channels to be added or removed from the scanning list on the fly.
1. Press the [MENU] key to enter the menu.
2. Enter Menu Item 16 (SC-ADD) on your numeric keypad to come to scanning add mode.
3. Press the [MENU] key to select.
4. Use the and keys to select if the channel will be added or removed from the scanning
list. The change will apply to the current channel selected
5. Press the [MENU] key to confirm and save.
6. Press the [EXIT/AB] key to exit the menu.
%
Scanning%a%Frequency%Range%(VFO%Mode)%
The GMRS-50V2 can scan a user selected frequency range
1. Press and hold for about 2 seconds