User Manual

46
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
!
GMRS-50V2!
!
!
!
CTCSS$
CTCSS is set with menus 11 R-CTCS and 13 T-CTCS.
Procedure 8.1. CTCSS setup how-to
1. Press the [MENU] key to enter the menu.
2. Enter 11 on the numeric keypad to get to receiver CTCSS (R-CTCS).
3. Press [MENU] to select.
4. Enter desired CTCSS sub-tone frequency in hertz on the numeric keypad, or rotate the main knob to
set the frequency.
5. Press [MENU] to confirm and save.
6. Enter 13 on the numeric keypad to go to transmitter CTCSS (T-CTCS).
7. Press [MENU] to select.
8. Enter desired CTCSS sub-tone frequency in hertz on the numeric keypad, or rotate the main knob
to set the desired frequency. Make sure it's the same frequency as that you entered for receiver
CTCSS.
9. Press [MENU] to confirm and save.
10. Press [EXIT/AB] to exit the menu system.
To turn CTCSS off, follow the same procedure but set it to off with the 0 key, or rotate the main knob to “OFF”
instead of selecting a CTCSS sub-tone frequency.