User Manual
Table Of Contents
- Part I. Getting started
- Chapter 1. – Getting Started
- Chapter 2. - GMRS Information and FCC Declaration
- Chapter 3. – Basic Shortcuts and Use
- Chapter 4. – Menu Quick Review
- Chapter 5. – Programming
- Chapter 6. – Other Settings
- Toggle from High to Low Power
- Storing an FM Radio Station and Scanning
- Keypad Lock-out
- PTT ID Setting
- DTMF RX Settings
- DTMF TX Settings
- Remote Stun
- Remote Kill
- Remote Revive
- Read More About Remote Commands
- DTMF Receive Settings, Transmit Setting (Call Key)
- 2TONE Receive Settings, Transmit Setting (Call Key)
- 5Tone Receive Settings, Transmit Setting (Call Key)
- Scanning modes
- SKIP Scanning Channels
- Scanning a Frequency Range (VFO Mode)
- Tone Scanning
- Dual, Tri, and Quad Watch (TMR)
- Chapter 7. - Selective calling
- Part III. How-to and setup guides.
- Chapter 8. - Repeaters
- Chapter 9. - Customization
- Appendix A. - Menu definitions
- Appendix B. - Technical specifications
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
11
Color Display and Icon Descriptions
The Top Line on the LCD will show the current selected channel’s settings at a glimpse:
Icon
Description
Icon
Description
Ico
Description
Channel allowed to TX and RX
DCS Enabled (TX,RX or Both)
Positive Offset (Freq. Mode)
Channel allowed to RX Only
Transmit Power: Low
Negative Offset (Freq. Mode)
Channel allowed to TX Only
Transmit Power: High
Offset Enabled (Chan. Mode)
Channel disabled to TX or RX
2Tone Calling Enabled
Channel set to Narrowband
Keypad is Locked
5Tone Calling Enabled
Channel set to Wideband
CTCSS Enabled (TX,RX or Both)
DTMF Calling Enabled
Channel Reverse Enabled
Battery Strength (Weak Battery Indicator)